diff --git a/Examples/Raw_LL/GPIO/LED_Toggle/main.c b/Examples/Raw_LL/GPIO/LED_Toggle/main.c
index 7eea040..39260a0 100644
--- a/Examples/Raw_LL/GPIO/LED_Toggle/main.c
+++ b/Examples/Raw_LL/GPIO/LED_Toggle/main.c
@@ -22,7 +22,9 @@
/* Includes ------------------------------------------------------------------*/
#include "main.h"
-#include "py32f003xx_ll_Start_Kit.h"
+#include "py32f0xx_bsp_button.h"
+#include "py32f0xx_bsp_led.h"
+#include "py32f0xx_bsp_printf.h"
/* Private define ------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
diff --git a/Libraries/BSP/Inc/py32f0xx_bsp_button.h b/Libraries/BSP/Inc/py32f0xx_bsp_button.h
index 6b1428a..6a9ed78 100644
--- a/Libraries/BSP/Inc/py32f0xx_bsp_button.h
+++ b/Libraries/BSP/Inc/py32f0xx_bsp_button.h
@@ -52,10 +52,6 @@ typedef enum
#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == 0) USER_BUTTON_GPIO_CLK_ENABLE();} while(0)
#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? USER_BUTTON_GPIO_CLK_DISABLE() : 0)
-/** @defgroup Functions
- * @{
- */
-uint32_t BSP_GetVersion(void);
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
void BSP_PB_DeInit(Button_TypeDef Button);
diff --git a/Libraries/BSP/Src/py32f0xx_bsp_button.c b/Libraries/BSP/Src/py32f0xx_bsp_button.c
index 44799a7..e81a1f2 100644
--- a/Libraries/BSP/Src/py32f0xx_bsp_button.c
+++ b/Libraries/BSP/Src/py32f0xx_bsp_button.c
@@ -6,10 +6,6 @@ const uint16_t BUTTON_PIN[BUTTONn] = {USER_BUTTON_PIN };
const uint8_t BUTTON_IRQn[BUTTONn] = {USER_BUTTON_EXTI_IRQn };
-/** @addtogroup LED_Functions
- * @{
- */
-
/**
* @brief Configures Button GPIO and EXTI Line.
* @param Button: Specifies the Button to be configured.
diff --git a/Libraries/BSP_LL/Inc/py32f003xx_ll_Start_Kit.h b/Libraries/BSP_LL/Inc/py32f0xx_bsp_button.h
old mode 100755
new mode 100644
similarity index 53%
rename from Libraries/BSP_LL/Inc/py32f003xx_ll_Start_Kit.h
rename to Libraries/BSP_LL/Inc/py32f0xx_bsp_button.h
index 4ca1e08..f174dd0
--- a/Libraries/BSP_LL/Inc/py32f003xx_ll_Start_Kit.h
+++ b/Libraries/BSP_LL/Inc/py32f0xx_bsp_button.h
@@ -1,35 +1,21 @@
/**
******************************************************************************
- * @file py32f003xx_ll_Start_Kit.h
+ * @file py32f0xx_bsp_button.h
* @author MCU Application Team
- * @brief This file provides set of firmware functions to manage Leds,
- * push-button available on Start Kit.
- ******************************************************************************
- * @attention
- *
- * © Copyright (c) Puya Semiconductor Co.
- * All rights reserved.
- *
- * © Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
+ * @brief
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef PY32F0XX_LL_START_KIT_H
-#define PY32F0XX_LL_START_KIT_H
+#ifndef PY32F003_BSP_BUTTON_H
+#define PY32F003_BSP_BUTTON_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
+
#include
#include "py32f0xx_ll_rcc.h"
#include "py32f0xx_ll_bus.h"
@@ -42,25 +28,6 @@ extern "C" {
#include "py32f0xx_ll_gpio.h"
#include "py32f0xx_ll_usart.h"
-/** @addtogroup BSP
- * @{
- */
-
-/** @defgroup py32f0xx_Start_Kit
- * @brief This section contains the exported types, contants and functions
- * required to use the Nucleo 32 board.
- * @{
- */
-
-/** @defgroup py32f0xx_Start_Kit_Exported_Types Exported Types
- * @{
- */
-typedef enum
-{
- LED3 = 0,
- LED_GREEN = LED3
-} Led_TypeDef;
-
typedef enum
{
BUTTON_USER = 0,
@@ -74,15 +41,7 @@ typedef enum
BUTTON_MODE_EXTI = 1
} ButtonMode_TypeDef;
-#define LEDn 1
-#define LED3_PIN LL_GPIO_PIN_5
-#define LED3_GPIO_PORT GPIOB
-#define LED3_GPIO_CLK_ENABLE() LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOB)
-#define LED3_GPIO_CLK_DISABLE() LL_IOP_GRP1_DisableClock(LL_IOP_GRP1_PERIPH_GPIOB)
-
-#define LEDx_GPIO_CLK_ENABLE(__INDEX__) do {LED3_GPIO_CLK_ENABLE(); } while(0U)
-#define LEDx_GPIO_CLK_DISABLE(__INDEX__) LED3_GPIO_CLK_DISABLE())
#define BUTTONn 1
@@ -110,35 +69,12 @@ typedef enum
#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? USER_BUTTON_GPIO_CLK_DISABLE() : 0)
-/************************************************************/
-
-/** @defgroup Functions
- * @{
- */
-uint32_t BSP_GetVersion(void);
-
-void BSP_LED_Init(Led_TypeDef Led);
-void BSP_LED_DeInit(Led_TypeDef Led);
-void BSP_LED_On(Led_TypeDef Led);
-void BSP_LED_Off(Led_TypeDef Led);
-void BSP_LED_Toggle(Led_TypeDef Led);
-
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
void BSP_PB_DeInit(Button_TypeDef Button);
uint32_t BSP_PB_GetState(Button_TypeDef Button);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
#ifdef __cplusplus
}
#endif
-#endif /* PY32F003XX_LL_START_KIT_H */
-
-/************************ (C) COPYRIGHT Puya *****END OF FILE****/
+#endif /* PY32F003_BSP_BUTTON_H */
diff --git a/Libraries/BSP_LL/Inc/py32f0xx_bsp_led.h b/Libraries/BSP_LL/Inc/py32f0xx_bsp_led.h
new file mode 100644
index 0000000..c22f7c1
--- /dev/null
+++ b/Libraries/BSP_LL/Inc/py32f0xx_bsp_led.h
@@ -0,0 +1,59 @@
+/**
+ ******************************************************************************
+ * @file py32f0xx_bsp_led.h
+ * @author MCU Application Team
+ * @brief
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef PY32F003_BSP_LED_H
+#define PY32F003_BSP_LED_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include
+#include "py32f0xx_ll_rcc.h"
+#include "py32f0xx_ll_bus.h"
+#include "py32f0xx_ll_system.h"
+#include "py32f0xx_ll_exti.h"
+#include "py32f0xx_ll_cortex.h"
+#include "py32f0xx_ll_utils.h"
+#include "py32f0xx_ll_pwr.h"
+#include "py32f0xx_ll_dma.h"
+#include "py32f0xx_ll_gpio.h"
+#include "py32f0xx_ll_usart.h"
+
+
+typedef enum
+{
+ LED3 = 0,
+ LED_GREEN = LED3
+} Led_TypeDef;
+
+#define LEDn 1
+
+#define LED3_PIN LL_GPIO_PIN_5
+#define LED3_GPIO_PORT GPIOB
+#define LED3_GPIO_CLK_ENABLE() LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOB)
+#define LED3_GPIO_CLK_DISABLE() LL_IOP_GRP1_DisableClock(LL_IOP_GRP1_PERIPH_GPIOB)
+
+#define LEDx_GPIO_CLK_ENABLE(__INDEX__) do {LED3_GPIO_CLK_ENABLE(); } while(0U)
+#define LEDx_GPIO_CLK_DISABLE(__INDEX__) LED3_GPIO_CLK_DISABLE())
+
+
+void BSP_LED_Init(Led_TypeDef Led);
+void BSP_LED_DeInit(Led_TypeDef Led);
+void BSP_LED_On(Led_TypeDef Led);
+void BSP_LED_Off(Led_TypeDef Led);
+void BSP_LED_Toggle(Led_TypeDef Led);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PY32F003_BSP_LED_H */
diff --git a/Libraries/BSP_LL/Src/py32f003xx_ll_Start_Kit.c b/Libraries/BSP_LL/Src/py32f003xx_ll_Start_Kit.c
deleted file mode 100755
index 70463fb..0000000
--- a/Libraries/BSP_LL/Src/py32f003xx_ll_Start_Kit.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/**
- ******************************************************************************
- * @file py32f003xx_ll_Start_Kit.c
- * @author MCU Application Team
- * @brief This file provides set of firmware functions to manage Leds,
- * push-button available on Start Kit.
- ******************************************************************************
- * @attention
- *
- * © Copyright (c) Puya Semiconductor Co.
- * All rights reserved.
- *
- * © Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "py32f003xx_ll_Start_Kit.h"
-
-/**
- * @brief PY32F003xx STK BSP Driver version number
- */
-#define __PY32F003xx_STK_BSP_VERSION_MAIN (0x01U) /*!< [31:24] main version */
-#define __PY32F003xx_STK_BSP_VERSION_SUB1 (0x00U) /*!< [23:16] sub1 version */
-#define __PY32F003xx_STK_BSP_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
-#define __PY32F003xx_STK_BSP_VERSION_RC (0x00U) /*!< [7:0] release candidate */
-#define __PY32F003xx_STK_BSP_VERSION ((__PY32F003xx_STK_BSP_VERSION_MAIN << 24) \
- |(__PY32F003xx_STK_BSP_VERSION_SUB1 << 16) \
- |(__PY32F003xx_STK_BSP_VERSION_SUB2 << 8 ) \
- |(__PY32F003xx_STK_BSP_VERSION_RC))
-
-GPIO_TypeDef* LED_PORT[LEDn] = {LED3_GPIO_PORT};
-const uint16_t LED_PIN[LEDn] = {LED3_PIN};
-
-GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {USER_BUTTON_GPIO_PORT };
-const uint16_t BUTTON_PIN[BUTTONn] = {USER_BUTTON_PIN };
-const uint8_t BUTTON_IRQn[BUTTONn] = {USER_BUTTON_EXTI_IRQn };
-const uint32_t BUTTON_EXTI_LINE[BUTTONn] = {USER_BUTTON_EXTI_LINE };
-
-/** @addtogroup PY32F003xx_STK_Exported_Functions
- * @{
- */
-
-/**
- * @brief This method returns the PY32F003 STK BSP Driver revision.
- * @retval version : 0xXYZR (8bits for each decimal, R for RC)
- */
-uint32_t BSP_GetVersion(void)
-{
- return __PY32F003xx_STK_BSP_VERSION;
-}
-
-/** @addtogroup LED_Functions
- * @{
- */
-
-/**
- * @brief Configures LED GPIO.
- * @param Led Specifies the Led to be configured.
- * This parameter can be one of following parameters:
- * @arg LED3
- * @retval None
- */
-void BSP_LED_Init(Led_TypeDef Led)
-{
- /* Enable the GPIO_LED Clock */
- LEDx_GPIO_CLK_ENABLE(Led);
-
- /* Configure the GPIO_LED pin */
- LL_GPIO_SetPinMode(LED_PORT[Led], LED_PIN[Led], LL_GPIO_MODE_OUTPUT);
- /* LL_GPIO_SetPinOutputType(LED_PORT[Led], LED_PIN[Led], LL_GPIO_OUTPUT_PUSHPULL); */
- /* LL_GPIO_SetPinSpeed(LED_PORT[Led], LED_PIN[Led], LL_GPIO_SPEED_FREQ_LOW); */
- /* LL_GPIO_SetPinPull(LED_PORT[Led], LED_PIN[Led], LL_GPIO_PULL_NO); */
-
- LL_GPIO_SetOutputPin(LED_PORT[Led], LED_PIN[Led]);
-}
-
-/**
- * @brief DeInitialize LED GPIO.
- * @param Led Specifies the Led to be deconfigured.
- * This parameter can be one of the following values:
- * @arg LED3
- * @note BSP_LED_DeInit() does not disable the GPIO clock
- * @retval None
- */
-void BSP_LED_DeInit(Led_TypeDef Led)
-{
- /* Turn off LED */
- LL_GPIO_ResetOutputPin(LED_PORT[Led], LED_PIN[Led]);
- /* DeInit the GPIO_LED pin */
- LL_GPIO_SetPinMode(LED_PORT[Led], LED_PIN[Led], LL_GPIO_MODE_ANALOG);
- /* LL_GPIO_SetPinOutputType(LED_PORT[Led], LED_PIN[Led], LL_GPIO_OUTPUT_PUSHPULL); */
- /* LL_GPIO_SetPinSpeed(LED_PORT[Led], LED_PIN[Led], LL_GPIO_SPEED_FREQ_LOW); */
- /* LL_GPIO_SetPinPull(LED_PORT[Led], LED_PIN[Led], LL_GPIO_PULL_NO); */
-}
-
-/**
- * @brief Turns selected LED On.
- * @param Led Specifies the Led to be set on.
- * This parameter can be one of following parameters:
- * @arg LED3
- * @retval None
- */
-void BSP_LED_On(Led_TypeDef Led)
-{
- LL_GPIO_ResetOutputPin(LED_PORT[Led], LED_PIN[Led]);
-}
-
-/**
- * @brief Turns selected LED Off.
- * @param Led Specifies the Led to be set off.
- * This parameter can be one of following parameters:
- * @arg LED3
- * @retval None
- */
-void BSP_LED_Off(Led_TypeDef Led)
-{
- LL_GPIO_SetOutputPin(LED_PORT[Led], LED_PIN[Led]);
-}
-
-/**
- * @brief Toggles the selected LED.
- * @param Led Specifies the Led to be toggled.
- * This parameter can be one of following parameters:
- * @arg LED3
- * @retval None
- */
-void BSP_LED_Toggle(Led_TypeDef Led)
-{
- LL_GPIO_TogglePin(LED_PORT[Led], LED_PIN[Led]);
-}
-
-/**
- * @brief Configures Button GPIO and EXTI Line.
- * @param Button: Specifies the Button to be configured.
- * This parameter should be: BUTTON_USER
- * @param ButtonMode: Specifies Button mode.
- * This parameter can be one of following parameters:
- * @arg BUTTON_MODE_GPIO: Button will be used as simple IO
- * @arg BUTTON_MODE_EXTI: Button will be connected to EXTI line with interrupt
- * generation capability
- * @retval None
- */
-void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
-{
- /* Enable the BUTTON Clock */
- BUTTONx_GPIO_CLK_ENABLE(Button);
-
- /* Configure GPIO for BUTTON */
- LL_GPIO_SetPinMode(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_MODE_INPUT);
- LL_GPIO_SetPinPull(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_PULL_NO);
- /* LL_GPIO_SetPinSpeed(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_SPEED_FREQ_HIGH); */
-
- if(ButtonMode == BUTTON_MODE_EXTI)
- {
- /* Configure Button pin as input with External interrupt */
- LL_EXTI_EnableIT(BUTTON_EXTI_LINE[Button]);
- LL_EXTI_EnableFallingTrig(BUTTON_EXTI_LINE[Button]);
-
- /* Enable and set Button EXTI Interrupt to the lowest priority */
- NVIC_SetPriority((IRQn_Type)(BUTTON_IRQn[Button]), 0x0F);
- NVIC_EnableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
- }
-}
-
-/**
- * @brief Push Button DeInit.
- * @param Button: Button to be configured
- * This parameter should be: BUTTON_USER
- * @note PB DeInit does not disable the GPIO clock
- * @retval None
- */
-void BSP_PB_DeInit(Button_TypeDef Button)
-{
- NVIC_DisableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
- LL_GPIO_SetPinMode(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_MODE_ANALOG);
- /* LL_GPIO_SetPinSpeed(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_SPEED_FREQ_LOW); */
- /* LL_GPIO_SetPinPull(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_PULL_NO); */
- /* LL_GPIO_SetAFPin_8_15(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_AF_0); */
-}
-
-/**
- * @brief Returns the selected Button state.
- * @param Button: Specifies the Button to be checked.
- * This parameter should be: BUTTON_USER
- * @retval Button state.
- */
-uint32_t BSP_PB_GetState(Button_TypeDef Button)
-{
- return LL_GPIO_IsInputPinSet(BUTTON_PORT[Button], BUTTON_PIN[Button]);
-}
-
-
-//#endif
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT Puya *****END OF FILE****/
diff --git a/Libraries/BSP_LL/Src/py32f0xx_bsp_button.c b/Libraries/BSP_LL/Src/py32f0xx_bsp_button.c
new file mode 100644
index 0000000..70169ad
--- /dev/null
+++ b/Libraries/BSP_LL/Src/py32f0xx_bsp_button.c
@@ -0,0 +1,69 @@
+#include "py32f0xx_bsp_button.h"
+
+
+GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {USER_BUTTON_GPIO_PORT };
+const uint16_t BUTTON_PIN[BUTTONn] = {USER_BUTTON_PIN };
+const uint8_t BUTTON_IRQn[BUTTONn] = {USER_BUTTON_EXTI_IRQn };
+const uint32_t BUTTON_EXTI_LINE[BUTTONn] = {USER_BUTTON_EXTI_LINE };
+
+
+
+/**
+ * @brief Configures Button GPIO and EXTI Line.
+ * @param Button: Specifies the Button to be configured.
+ * This parameter should be: BUTTON_USER
+ * @param ButtonMode: Specifies Button mode.
+ * This parameter can be one of following parameters:
+ * @arg BUTTON_MODE_GPIO: Button will be used as simple IO
+ * @arg BUTTON_MODE_EXTI: Button will be connected to EXTI line with interrupt
+ * generation capability
+ * @retval None
+ */
+void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
+{
+ /* Enable the BUTTON Clock */
+ BUTTONx_GPIO_CLK_ENABLE(Button);
+
+ /* Configure GPIO for BUTTON */
+ LL_GPIO_SetPinMode(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_MODE_INPUT);
+ LL_GPIO_SetPinPull(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_PULL_NO);
+ /* LL_GPIO_SetPinSpeed(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_SPEED_FREQ_HIGH); */
+
+ if(ButtonMode == BUTTON_MODE_EXTI)
+ {
+ /* Configure Button pin as input with External interrupt */
+ LL_EXTI_EnableIT(BUTTON_EXTI_LINE[Button]);
+ LL_EXTI_EnableFallingTrig(BUTTON_EXTI_LINE[Button]);
+
+ /* Enable and set Button EXTI Interrupt to the lowest priority */
+ NVIC_SetPriority((IRQn_Type)(BUTTON_IRQn[Button]), 0x0F);
+ NVIC_EnableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
+ }
+}
+
+/**
+ * @brief Push Button DeInit.
+ * @param Button: Button to be configured
+ * This parameter should be: BUTTON_USER
+ * @note PB DeInit does not disable the GPIO clock
+ * @retval None
+ */
+void BSP_PB_DeInit(Button_TypeDef Button)
+{
+ NVIC_DisableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
+ LL_GPIO_SetPinMode(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_MODE_ANALOG);
+ /* LL_GPIO_SetPinSpeed(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_SPEED_FREQ_LOW); */
+ /* LL_GPIO_SetPinPull(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_PULL_NO); */
+ /* LL_GPIO_SetAFPin_8_15(BUTTON_PORT[Button], BUTTON_PIN[Button], LL_GPIO_AF_0); */
+}
+
+/**
+ * @brief Returns the selected Button state.
+ * @param Button: Specifies the Button to be checked.
+ * This parameter should be: BUTTON_USER
+ * @retval Button state.
+ */
+uint32_t BSP_PB_GetState(Button_TypeDef Button)
+{
+ return LL_GPIO_IsInputPinSet(BUTTON_PORT[Button], BUTTON_PIN[Button]);
+}
diff --git a/Libraries/BSP_LL/Src/py32f0xx_bsp_led.c b/Libraries/BSP_LL/Src/py32f0xx_bsp_led.c
new file mode 100644
index 0000000..32e62cf
--- /dev/null
+++ b/Libraries/BSP_LL/Src/py32f0xx_bsp_led.c
@@ -0,0 +1,82 @@
+#include "py32f0xx_bsp_led.h"
+
+
+GPIO_TypeDef* LED_PORT[LEDn] = {LED3_GPIO_PORT};
+const uint16_t LED_PIN[LEDn] = {LED3_PIN};
+
+
+/**
+ * @brief Configures LED GPIO.
+ * @param Led Specifies the Led to be configured.
+ * This parameter can be one of following parameters:
+ * @arg LED3
+ * @retval None
+ */
+void BSP_LED_Init(Led_TypeDef Led)
+{
+ /* Enable the GPIO_LED Clock */
+ LEDx_GPIO_CLK_ENABLE(Led);
+
+ /* Configure the GPIO_LED pin */
+ LL_GPIO_SetPinMode(LED_PORT[Led], LED_PIN[Led], LL_GPIO_MODE_OUTPUT);
+ /* LL_GPIO_SetPinOutputType(LED_PORT[Led], LED_PIN[Led], LL_GPIO_OUTPUT_PUSHPULL); */
+ /* LL_GPIO_SetPinSpeed(LED_PORT[Led], LED_PIN[Led], LL_GPIO_SPEED_FREQ_LOW); */
+ /* LL_GPIO_SetPinPull(LED_PORT[Led], LED_PIN[Led], LL_GPIO_PULL_NO); */
+
+ LL_GPIO_SetOutputPin(LED_PORT[Led], LED_PIN[Led]);
+}
+
+/**
+ * @brief DeInitialize LED GPIO.
+ * @param Led Specifies the Led to be deconfigured.
+ * This parameter can be one of the following values:
+ * @arg LED3
+ * @note BSP_LED_DeInit() does not disable the GPIO clock
+ * @retval None
+ */
+void BSP_LED_DeInit(Led_TypeDef Led)
+{
+ /* Turn off LED */
+ LL_GPIO_ResetOutputPin(LED_PORT[Led], LED_PIN[Led]);
+ /* DeInit the GPIO_LED pin */
+ LL_GPIO_SetPinMode(LED_PORT[Led], LED_PIN[Led], LL_GPIO_MODE_ANALOG);
+ /* LL_GPIO_SetPinOutputType(LED_PORT[Led], LED_PIN[Led], LL_GPIO_OUTPUT_PUSHPULL); */
+ /* LL_GPIO_SetPinSpeed(LED_PORT[Led], LED_PIN[Led], LL_GPIO_SPEED_FREQ_LOW); */
+ /* LL_GPIO_SetPinPull(LED_PORT[Led], LED_PIN[Led], LL_GPIO_PULL_NO); */
+}
+
+/**
+ * @brief Turns selected LED On.
+ * @param Led Specifies the Led to be set on.
+ * This parameter can be one of following parameters:
+ * @arg LED3
+ * @retval None
+ */
+void BSP_LED_On(Led_TypeDef Led)
+{
+ LL_GPIO_ResetOutputPin(LED_PORT[Led], LED_PIN[Led]);
+}
+
+/**
+ * @brief Turns selected LED Off.
+ * @param Led Specifies the Led to be set off.
+ * This parameter can be one of following parameters:
+ * @arg LED3
+ * @retval None
+ */
+void BSP_LED_Off(Led_TypeDef Led)
+{
+ LL_GPIO_SetOutputPin(LED_PORT[Led], LED_PIN[Led]);
+}
+
+/**
+ * @brief Toggles the selected LED.
+ * @param Led Specifies the Led to be toggled.
+ * This parameter can be one of following parameters:
+ * @arg LED3
+ * @retval None
+ */
+void BSP_LED_Toggle(Led_TypeDef Led)
+{
+ LL_GPIO_TogglePin(LED_PORT[Led], LED_PIN[Led]);
+}