diff --git a/Examples/LL/ADC/ADC_InternalTemperature/main.c b/Examples/LL/ADC/ADC_InternalTemperature/main.c
new file mode 100644
index 0000000..6fea4f4
--- /dev/null
+++ b/Examples/LL/ADC/ADC_InternalTemperature/main.c
@@ -0,0 +1,104 @@
+/**
+ * Demo of reading internal temperature sensor
+ * - Works on QFN32 packaging
+ * - Doesn't work on TSSOP20 packaging, always read 0xFFF
+*/
+#include "main.h"
+#include "py32f0xx_bsp_clock.h"
+#include "py32f0xx_bsp_printf.h"
+
+#define VDDA_APPLI                       ((uint32_t)3300)
+
+uint16_t convert_result = 0, temperature = 0;
+
+static void APP_ADCConfig(void);
+
+
+int main(void)
+{
+  // Set system clock to 48MHz
+  BSP_HSI_PLL_48MConfig();
+  // Initialize UART on PA2:TX PA3:RX
+  BSP_USART_Config(115200);
+  printf("PY32F0 Internal Temperature Sensor Demo\r\nClock: %ld\r\n", SystemCoreClock);
+
+  APP_ADCConfig();
+  // Start ADC regular conversion
+  LL_ADC_REG_StartConversion(ADC1);
+
+  while (1)
+  {
+    if(LL_ADC_IsActiveFlag_EOS(ADC1))
+    {
+      LL_ADC_ClearFlag_EOS(ADC1);
+      // Read regular conversion data, 12-bit
+      convert_result = LL_ADC_REG_ReadConversionData12(ADC1);
+      // Convert it to temperature
+      temperature = __LL_ADC_CALC_TEMPERATURE(VDDA_APPLI, convert_result, LL_ADC_RESOLUTION_12B);
+      printf("Temperature:%d  DR:%d \r\n", temperature, convert_result);
+      LL_mDelay(1000);
+    }
+  }
+}
+
+static void APP_ADCConfig(void)
+{
+  __IO uint32_t wait_loop_index = 0;
+
+  LL_ADC_InitTypeDef ADC_Init;
+  LL_ADC_REG_InitTypeDef LL_ADC_REG_InitType;
+
+  LL_ADC_Reset(ADC1);
+
+  LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_ADC1);
+
+  // Calibrate start
+  if (LL_ADC_IsEnabled(ADC1) == 0)
+  {
+    LL_ADC_StartCalibration(ADC1);
+    while (LL_ADC_IsCalibrationOnGoing(ADC1) != 0);
+    /* Delay 1ms(>= 4 ADC clocks) before re-enable ADC */
+    LL_mDelay(1);
+  }
+  // Calibrate end
+
+  ADC_Init.Clock = LL_ADC_CLOCK_SYNC_PCLK_DIV64;
+  ADC_Init.DataAlignment = LL_ADC_DATA_ALIGN_RIGHT;
+  ADC_Init.LowPowerMode = LL_ADC_LP_MODE_NONE;
+  ADC_Init.Resolution = LL_ADC_RESOLUTION_12B;
+  LL_ADC_Init(ADC1, &ADC_Init);
+  LL_ADC_SetSamplingTimeCommonChannels(ADC1, LL_ADC_SAMPLINGTIME_239CYCLES_5);
+
+  // Regular ADC config
+  LL_ADC_REG_InitType.ContinuousMode = LL_ADC_REG_CONV_CONTINUOUS;
+  LL_ADC_REG_InitType.DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE;
+  LL_ADC_REG_InitType.Overrun = LL_ADC_REG_OVR_DATA_OVERWRITTEN;
+  LL_ADC_REG_InitType.SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE;
+  LL_ADC_REG_InitType.TriggerSource = LL_ADC_REG_TRIG_SOFTWARE;
+  LL_ADC_REG_Init(ADC1, &LL_ADC_REG_InitType);
+  // Set common path and internal channel
+  LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(ADC1), LL_ADC_PATH_INTERNAL_TEMPSENSOR);
+  // Delay to ensure temperature sensor becomes stable
+  wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US * (SystemCoreClock / (100000 * 2))) / 10);
+  while(wait_loop_index != 0)
+  {
+    wait_loop_index--;
+  }
+  // Select temperature sensor
+  LL_ADC_REG_SetSequencerChannels(ADC1, LL_ADC_CHANNEL_TEMPSENSOR);
+  // Enable ADC
+  LL_ADC_Enable(ADC1);
+  LL_mDelay(1);
+}
+
+void APP_ErrorHandler(void)
+{
+  while (1);
+}
+
+#ifdef  USE_FULL_ASSERT
+void assert_failed(uint8_t *file, uint32_t line)
+{
+  while (1);
+}
+#endif /* USE_FULL_ASSERT */
diff --git a/Examples/LL/ADC/ADC_InternalTemperature/main.h b/Examples/LL/ADC/ADC_InternalTemperature/main.h
new file mode 100644
index 0000000..fe3863f
--- /dev/null
+++ b/Examples/LL/ADC/ADC_InternalTemperature/main.h
@@ -0,0 +1,27 @@
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "py32f0xx_ll_adc.h"
+#include "py32f0xx_ll_bus.h"
+#include "py32f0xx_ll_cortex.h"
+#include "py32f0xx_ll_dma.h"
+#include "py32f0xx_ll_exti.h"
+#include "py32f0xx_ll_gpio.h"
+#include "py32f0xx_ll_pwr.h"
+#include "py32f0xx_ll_rcc.h"
+#include "py32f0xx_ll_system.h"
+#include "py32f0xx_ll_tim.h"
+#include "py32f0xx_ll_utils.h"
+
+
+void APP_ErrorHandler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
diff --git a/Examples/LL/ADC/ADC_InternalTemperature/py32f0xx_it.c b/Examples/LL/ADC/ADC_InternalTemperature/py32f0xx_it.c
new file mode 100644
index 0000000..458707c
--- /dev/null
+++ b/Examples/LL/ADC/ADC_InternalTemperature/py32f0xx_it.c
@@ -0,0 +1,42 @@
+#include "main.h"
+#include "py32f0xx_it.h"
+
+extern void APP_TransferCompleteCallback(void);
+
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+}
diff --git a/Examples/LL/ADC/ADC_InternalTemperature/py32f0xx_it.h b/Examples/LL/ADC/ADC_InternalTemperature/py32f0xx_it.h
new file mode 100644
index 0000000..f1403ae
--- /dev/null
+++ b/Examples/LL/ADC/ADC_InternalTemperature/py32f0xx_it.h
@@ -0,0 +1,18 @@
+#ifndef __PY32F0XX_IT_H
+#define __PY32F0XX_IT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void SVC_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PY32F0XX_IT_H */