feat: ll freertos semaphore examples

Examples/FreeRTOS/Semaphore/LL_Binary_Semaphore/FreeRTOSConfig.h

@@ -0,0 +1,98 @@
+/*
+ * FreeRTOS V202112.00
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. 
+ *
+ * See http://www.freertos.org/a00110.html
+ *----------------------------------------------------------*/
+
+/* Ensure definitions are only used by the compiler, and not by the assembler. */
+#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
+    #include <stdint.h>
+    #include <stdio.h>
+    extern uint32_t SystemCoreClock;
+#endif
+
+#define configUSE_PREEMPTION		1
+#define configUSE_IDLE_HOOK			0
+#define configUSE_TICK_HOOK			0
+#define configCPU_CLOCK_HZ			( SystemCoreClock )	
+#define configTICK_RATE_HZ			( ( TickType_t ) 1000 )
+#define configMAX_PRIORITIES		( 2 )
+#define configMINIMAL_STACK_SIZE	( ( unsigned short ) 64 )
+#define configTOTAL_HEAP_SIZE		( ( size_t ) ( 3 * 1024 ) )
+#define configMAX_TASK_NAME_LEN		( 16 )
+#define configUSE_TRACE_FACILITY	1
+#define configUSE_16_BIT_TICKS		0
+#define configIDLE_SHOULD_YIELD		1
+#define configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS 0
+
+#define configUSE_STATS_FORMATTING_FUNCTIONS 1
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES 		0
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+
+#define INCLUDE_vTaskPrioritySet		1
+#define INCLUDE_uxTaskPriorityGet		1
+#define INCLUDE_vTaskDelete				1
+#define INCLUDE_vTaskCleanUpResources	0
+#define INCLUDE_vTaskSuspend			1
+#define INCLUDE_vTaskDelayUntil			1
+#define INCLUDE_vTaskDelay				1
+
+#define INCLUDE_uxTaskGetStackHighWaterMark 1
+#define INCLUDE_uxTaskGetStackHighWaterMark2 1
+#define INCLUDE_xTaskGetHandle 1
+
+/* This is the raw value as per the Cortex-M3 NVIC.  Values can be 255
+(lowest) to 0 (1?) (highest). */
+#define configKERNEL_INTERRUPT_PRIORITY 		255
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	191 /* equivalent to 10-111111, or priority 2. */
+
+/* Use MACRO to replace the handlers without changing startup file */
+#define vPortSVCHandler     SVC_Handler
+#define xPortPendSVHandler  PendSV_Handler
+#define xPortSysTickHandler SysTick_Handler
+
+
+#endif /* FREERTOS_CONFIG_H */

Examples/FreeRTOS/Semaphore/LL_Binary_Semaphore/main.c

@@ -0,0 +1,160 @@
+/**
+ * Example of Binary Semaphore
+ * 
+ * Note: Require RAM > 6K Byte
+ */
+#include "main.h"
+#include "py32f0xx_bsp_printf.h"
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+#include "semphr.h"
+
+TaskStatus_t xTaskDetails;
+char buff[512];
+
+SemaphoreHandle_t xBinarySemaphore;
+volatile uint32_t val;
+
+static void APP_SystemClockConfig(void);
+static void APP_GPIOConfig(void);
+static void APP_TIM1Config(void);
+
+void taskUART(void *pvParameters)
+{
+  (void)(pvParameters);
+
+  while (1)
+  {
+    // Block till being notified by TIM1 Interrupt
+    xSemaphoreTake(xBinarySemaphore, portMAX_DELAY);
+    /**
+     * Use printf() will take more stack size
+     * printf("%lu Name  State  Priority Stack Num\r\n%s", val, buff);
+    */
+    BSP_UART_TxHex32(val);
+    BSP_UART_TxString(" Name  State  Priority Stack Num\r\n");
+    BSP_UART_TxString(buff);
+  }
+}
+
+void taskInfo(void *pvParameters)
+{
+  (void)(pvParameters);
+
+  while (1)
+  {
+    vTaskList(buff);
+    vTaskDelay(300);
+  }
+}
+
+int main(void)
+{
+  BaseType_t xReturned;
+
+  APP_SystemClockConfig();
+  APP_GPIOConfig();
+
+  BSP_USART_Config(115200);
+  printf("SystemClk:%ld\r\n", SystemCoreClock);
+
+  xBinarySemaphore = xSemaphoreCreateBinary();
+  if (xBinarySemaphore == NULL)
+  {
+    APP_ErrorHandler();
+  }
+
+  xReturned = xTaskCreate(taskUART, "taskUART", 160, NULL, 2, NULL); 
+  if (xReturned != pdPASS)
+  {
+      APP_ErrorHandler();
+  }
+
+  xReturned = xTaskCreate(taskInfo, "taskInfo", 160, NULL, 2, NULL); 
+  if (xReturned != pdPASS)
+  {
+      APP_ErrorHandler();
+  }
+
+  APP_TIM1Config();
+
+  printf("FreeRTOS Scheduler starting...\r\n");
+  /* Start the scheduler. */
+  vTaskStartScheduler();
+
+  /* Will only get here if there was not enough heap space to create the idle task. */
+  return 0;
+}
+
+static void APP_TIM1Config(void)
+{
+  LL_TIM_InitTypeDef TIM1CountInit = {0};
+
+  LL_APB1_GRP2_EnableClock(RCC_APBENR2_TIM1EN);
+  
+  TIM1CountInit.ClockDivision       = LL_TIM_CLOCKDIVISION_DIV1;
+  TIM1CountInit.CounterMode         = LL_TIM_COUNTERMODE_UP;
+  TIM1CountInit.Prescaler           = 8000-1;
+  TIM1CountInit.Autoreload          = 6000-1;
+  TIM1CountInit.RepetitionCounter   = 0;
+  LL_TIM_Init(TIM1,&TIM1CountInit);
+
+  LL_TIM_EnableIT_UPDATE(TIM1);
+  LL_TIM_EnableCounter(TIM1);
+
+  NVIC_EnableIRQ(TIM1_BRK_UP_TRG_COM_IRQn);
+  NVIC_SetPriority(TIM1_BRK_UP_TRG_COM_IRQn, 2);
+}
+
+/**
+ * Set system clock to 48MHz
+*/
+static void APP_SystemClockConfig(void)
+{
+  LL_UTILS_ClkInitTypeDef UTILS_ClkInitStruct;
+
+  LL_RCC_HSI_Enable();
+  /* Change this value to adjust frequency */
+  LL_RCC_HSI_SetCalibFreq(LL_RCC_HSICALIBRATION_24MHz);
+  while(LL_RCC_HSI_IsReady() != 1);
+
+  UTILS_ClkInitStruct.AHBCLKDivider = LL_RCC_SYSCLK_DIV_1;
+  UTILS_ClkInitStruct.APB1CLKDivider = LL_RCC_APB1_DIV_1;
+  LL_PLL_ConfigSystemClock_HSI(&UTILS_ClkInitStruct);
+
+  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+
+  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL);
+
+  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+  LL_SetSystemCoreClock(48000000);
+}
+
+static void APP_GPIOConfig(void)
+{
+  LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOB);
+  LL_GPIO_SetPinMode(GPIOB, LL_GPIO_PIN_5, LL_GPIO_MODE_OUTPUT);
+}
+
+void TIM1_BRK_UP_TRG_COM_IRQHandler(void)
+{
+  BaseType_t xHigherPriorityTaskWoken;
+  xHigherPriorityTaskWoken = pdFALSE;
+  if(LL_TIM_IsActiveFlag_UPDATE(TIM1) && LL_TIM_IsEnabledIT_UPDATE(TIM1))
+  {
+      // Clear interrupt flag
+      LL_TIM_ClearFlag_UPDATE(TIM1);
+      // Increase the value
+      val++;
+      // Give the semaphore so that taskUART can proceed
+      xSemaphoreGiveFromISR( xBinarySemaphore, &xHigherPriorityTaskWoken );
+  }
+  portYIELD_FROM_ISR(xHigherPriorityTaskWoken);
+}
+
+void APP_ErrorHandler(void)
+{
+  while (1);
+}

Examples/FreeRTOS/Semaphore/LL_Binary_Semaphore/main.h

@@ -0,0 +1,25 @@
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "py32f0xx_ll_bus.h"
+#include "py32f0xx_ll_cortex.h"
+#include "py32f0xx_ll_exti.h"
+#include "py32f0xx_ll_gpio.h"
+#include "py32f0xx_ll_pwr.h"
+#include "py32f0xx_ll_rcc.h"
+#include "py32f0xx_ll_system.h"
+#include "py32f0xx_ll_tim.h"
+#include "py32f0xx_ll_utils.h"
+
+
+void APP_ErrorHandler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */

Examples/FreeRTOS/Semaphore/LL_Binary_Semaphore/py32f0xx_it.c

@@ -0,0 +1,17 @@
+#include "main.h"
+#include "py32f0xx_it.h"
+
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  while (1);
+}

Examples/FreeRTOS/Semaphore/LL_Binary_Semaphore/py32f0xx_it.h

@@ -0,0 +1,16 @@
+#ifndef __PY32F0XX_IT_H
+#define __PY32F0XX_IT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PY32F0XX_IT_H */

Examples/FreeRTOS/Semaphore/LL_Counting_Semaphore/FreeRTOSConfig.h

@@ -0,0 +1,96 @@
+/*
+ * FreeRTOS V202112.00
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. 
+ *
+ * See http://www.freertos.org/a00110.html
+ *----------------------------------------------------------*/
+
+/* Ensure definitions are only used by the compiler, and not by the assembler. */
+#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
+    #include <stdint.h>
+    #include <stdio.h>
+    extern uint32_t SystemCoreClock;
+#endif
+
+#define configUSE_PREEMPTION		1
+#define configUSE_IDLE_HOOK			0
+#define configUSE_TICK_HOOK			0
+#define configCPU_CLOCK_HZ			( SystemCoreClock )	
+#define configTICK_RATE_HZ			( ( TickType_t ) 1000 )
+#define configMAX_PRIORITIES		( 2 )
+#define configMINIMAL_STACK_SIZE	( ( unsigned short ) 64 )
+#define configTOTAL_HEAP_SIZE		( ( size_t ) ( 4 * 1024 ) )
+#define configMAX_TASK_NAME_LEN		( 16 )
+#define configUSE_TRACE_FACILITY	1
+#define configUSE_16_BIT_TICKS		0
+#define configIDLE_SHOULD_YIELD		1
+#define configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS 0
+
+#define configUSE_MUTEXES 1
+#define configUSE_COUNTING_SEMAPHORES 1
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES 		0
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+
+#define INCLUDE_vTaskPrioritySet		1
+#define INCLUDE_uxTaskPriorityGet		0
+#define INCLUDE_vTaskDelete				1
+#define INCLUDE_vTaskCleanUpResources	1
+#define INCLUDE_vTaskSuspend			1
+#define INCLUDE_vTaskDelayUntil			1
+#define INCLUDE_vTaskDelay				1
+
+
+/* This is the raw value as per the Cortex-M3 NVIC.  Values can be 255
+(lowest) to 0 (1?) (highest). */
+#define configKERNEL_INTERRUPT_PRIORITY 		255
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	191 /* equivalent to 10-111111, or priority 2. */
+
+/* Use MACRO to replace the handlers without changing startup file */
+#define vPortSVCHandler     SVC_Handler
+#define xPortPendSVHandler  PendSV_Handler
+#define xPortSysTickHandler SysTick_Handler
+
+
+#endif /* FREERTOS_CONFIG_H */

Examples/FreeRTOS/Semaphore/LL_Counting_Semaphore/main.c

@@ -0,0 +1,143 @@
+/**
+ * Example of Counting Semaphore
+ * - 3 producers, each generate 255 numbers
+ * - 2 consumers, print the produced numbers
+ * 
+ * Note: Require RAM > 6.5K Byte
+ */
+#include <string.h>
+#include "main.h"
+#include "py32f0xx_bsp_printf.h"
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+#include "semphr.h"
+
+#define QUEUE_SIZE      5
+#define PRODUCERS       3
+#define CONSUMERS       2
+#define LIMIT           0x100
+
+SemaphoreHandle_t mutex;
+SemaphoreHandle_t binary_sema;
+SemaphoreHandle_t empty_sema;
+SemaphoreHandle_t filled_sema;
+
+const uint16_t ids[] = {1,2,3,4,5};
+uint16_t buf[QUEUE_SIZE], from = 0, to = 0;
+
+static void APP_SystemClockConfig(void);
+static void APP_GPIOConfig(void);
+
+void taskProducer(void *pvParameters)
+{
+  uint16_t count, id = *(uint16_t *)pvParameters;
+
+  for (count = 0; count < LIMIT; count++)
+  {
+    xSemaphoreTake(empty_sema, portMAX_DELAY);
+    xSemaphoreTake(mutex, portMAX_DELAY);
+    buf[to] = ((id & 0xFF) << 8) + count;
+    to = (to + 1) % QUEUE_SIZE;
+    xSemaphoreGive(mutex);
+    xSemaphoreGive(filled_sema);
+  }
+  vTaskDelete(NULL);
+}
+
+void taskConsumer(void *pvParameters)
+{
+  uint16_t id = *(uint16_t *)pvParameters;
+
+  while (1)
+  {
+    xSemaphoreTake(filled_sema, portMAX_DELAY);
+    xSemaphoreTake(mutex, portMAX_DELAY);
+    BSP_UART_TxHex16(id);
+    BSP_UART_TxChar(':');
+    BSP_UART_TxHex16(buf[from]);
+    BSP_UART_TxString("\r\n");
+    from = (from + 1) % QUEUE_SIZE;
+    xSemaphoreGive(mutex);
+    xSemaphoreGive(empty_sema);
+  }
+}
+
+int main(void)
+{
+  uint8_t i;
+
+  APP_SystemClockConfig();
+  APP_GPIOConfig();
+
+  BSP_USART_Config(115200);
+  printf("SystemClk:%ld\r\n", SystemCoreClock);
+
+  mutex = xSemaphoreCreateMutex();
+  binary_sema = xSemaphoreCreateBinary();
+  empty_sema = xSemaphoreCreateCounting(QUEUE_SIZE, QUEUE_SIZE);
+  filled_sema = xSemaphoreCreateCounting(QUEUE_SIZE, 0);
+
+  memset(buf, 0, QUEUE_SIZE * sizeof(uint16_t));
+
+  for (i = 0; i < PRODUCERS; i++)
+  {
+    printf("Producer %d\n", i);
+    if (xTaskCreate(taskProducer, "taskProducer", 128, (void *)&ids[i], 2, NULL) != pdPASS)
+    {
+      APP_ErrorHandler();
+    }
+  }
+
+  for (i = 0; i < CONSUMERS; i++)
+  {
+    printf("Consumer %d\n", i);
+    if (xTaskCreate(taskConsumer, "taskConsumer", 128, (void *)&ids[i], 2, NULL) != pdPASS)
+    {
+      APP_ErrorHandler();
+    }
+  }
+
+  printf("FreeRTOS Scheduler starting...\r\n");
+  /* Start the scheduler. */
+  vTaskStartScheduler();
+
+  /* Will only get here if there was not enough heap space to create the idle task. */
+  return 0;
+}
+
+/**
+ * Set system clock to 48MHz
+*/
+static void APP_SystemClockConfig(void)
+{
+  LL_UTILS_ClkInitTypeDef UTILS_ClkInitStruct;
+
+  LL_RCC_HSI_Enable();
+  /* Change this value to adjust frequency */
+  LL_RCC_HSI_SetCalibFreq(LL_RCC_HSICALIBRATION_24MHz);
+  while(LL_RCC_HSI_IsReady() != 1);
+
+  UTILS_ClkInitStruct.AHBCLKDivider = LL_RCC_SYSCLK_DIV_1;
+  UTILS_ClkInitStruct.APB1CLKDivider = LL_RCC_APB1_DIV_1;
+  LL_PLL_ConfigSystemClock_HSI(&UTILS_ClkInitStruct);
+
+  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+
+  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL);
+
+  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+  LL_SetSystemCoreClock(48000000);
+}
+
+static void APP_GPIOConfig(void)
+{
+  LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOB);
+  LL_GPIO_SetPinMode(GPIOB, LL_GPIO_PIN_5, LL_GPIO_MODE_OUTPUT);
+}
+
+void APP_ErrorHandler(void)
+{
+  while (1);
+}

Examples/FreeRTOS/Semaphore/LL_Counting_Semaphore/main.h

@@ -0,0 +1,25 @@
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "py32f0xx_ll_bus.h"
+#include "py32f0xx_ll_cortex.h"
+#include "py32f0xx_ll_exti.h"
+#include "py32f0xx_ll_gpio.h"
+#include "py32f0xx_ll_pwr.h"
+#include "py32f0xx_ll_rcc.h"
+#include "py32f0xx_ll_system.h"
+#include "py32f0xx_ll_tim.h"
+#include "py32f0xx_ll_utils.h"
+
+
+void APP_ErrorHandler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */

Examples/FreeRTOS/Semaphore/LL_Counting_Semaphore/py32f0xx_it.c

@@ -0,0 +1,17 @@
+#include "main.h"
+#include "py32f0xx_it.h"
+
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  while (1);
+}

Examples/FreeRTOS/Semaphore/LL_Counting_Semaphore/py32f0xx_it.h

@@ -0,0 +1,16 @@
+#ifndef __PY32F0XX_IT_H
+#define __PY32F0XX_IT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PY32F0XX_IT_H */

Examples/FreeRTOS/Semaphore/LL_Mutex/FreeRTOSConfig.h

@@ -0,0 +1,94 @@
+/*
+ * FreeRTOS V202112.00
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. 
+ *
+ * See http://www.freertos.org/a00110.html
+ *----------------------------------------------------------*/
+
+/* Ensure definitions are only used by the compiler, and not by the assembler. */
+#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
+    #include <stdint.h>
+    #include <stdio.h>
+    extern uint32_t SystemCoreClock;
+#endif
+
+#define configUSE_PREEMPTION		1
+#define configUSE_IDLE_HOOK			0
+#define configUSE_TICK_HOOK			0
+#define configCPU_CLOCK_HZ			( SystemCoreClock )	
+#define configTICK_RATE_HZ			( ( TickType_t ) 1000 )
+#define configMAX_PRIORITIES		( 5 )
+#define configMINIMAL_STACK_SIZE	( ( unsigned short ) 64 )
+#define configTOTAL_HEAP_SIZE		( ( size_t ) ( 2 * 1024 ) )
+#define configMAX_TASK_NAME_LEN		( 16 )
+#define configUSE_TRACE_FACILITY	0
+#define configUSE_16_BIT_TICKS		0
+#define configIDLE_SHOULD_YIELD		1
+#define configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS 0
+
+#define configUSE_MUTEXES 1
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES 		0
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+
+#define INCLUDE_vTaskPrioritySet		1
+#define INCLUDE_uxTaskPriorityGet		1
+#define INCLUDE_vTaskDelete				1
+#define INCLUDE_vTaskCleanUpResources	0
+#define INCLUDE_vTaskSuspend			1
+#define INCLUDE_vTaskDelayUntil			1
+#define INCLUDE_vTaskDelay				1
+
+/* This is the raw value as per the Cortex-M3 NVIC.  Values can be 255
+(lowest) to 0 (1?) (highest). */
+#define configKERNEL_INTERRUPT_PRIORITY 		255
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	191 /* equivalent to 10-111111, or priority 2. */
+
+/* Use MACRO to replace the handlers without changing startup file */
+#define vPortSVCHandler     SVC_Handler
+#define xPortPendSVHandler  PendSV_Handler
+#define xPortSysTickHandler SysTick_Handler
+
+
+#endif /* FREERTOS_CONFIG_H */

Examples/FreeRTOS/Semaphore/LL_Mutex/main.c

@@ -0,0 +1,101 @@
+/**
+ * Example of Mutex
+ * 
+ * Note: Require RAM > 4.5K Byte
+ */
+#include "main.h"
+#include "py32f0xx_bsp_printf.h"
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+#include "semphr.h"
+
+const uint8_t ids[] = {1,2,3};
+SemaphoreHandle_t mutex;
+volatile uint16_t counter;
+
+static void APP_SystemClockConfig(void);
+static void APP_GPIOConfig(void);
+
+void taskCount(void *pvParameters)
+{
+  uint8_t id = *(uint8_t *)pvParameters;
+
+  while (1)
+  {
+    xSemaphoreTake(mutex, portMAX_DELAY);
+    counter++;
+    BSP_UART_TxHex8(id);
+    BSP_UART_TxChar(':');
+    BSP_UART_TxHex16(counter);
+    BSP_UART_TxString("\r\n");
+    xSemaphoreGive(mutex);
+    vTaskDelay(0);
+  }
+}
+
+int main(void)
+{
+  uint8_t i;
+
+  APP_SystemClockConfig();
+  APP_GPIOConfig();
+
+  BSP_USART_Config(115200);
+  printf("SystemClk:%ld\r\n", SystemCoreClock);
+
+  // Create mutex
+  mutex = xSemaphoreCreateMutex();
+  // Create tasks
+  for (i = 0; i < 3; i++)
+  {
+    printf("Task %d\n", ids[i]);
+    if (xTaskCreate(taskCount, "taskProducer", configMINIMAL_STACK_SIZE, (void *)&ids[i], 2, NULL) != pdPASS)
+    {
+      APP_ErrorHandler();
+    }
+  }
+
+  printf("FreeRTOS Scheduler starting...\r\n");
+  /* Start the scheduler. */
+  vTaskStartScheduler();
+
+  /* Will only get here if there was not enough heap space to create the idle task. */
+  return 0;
+}
+
+static void APP_SystemClockConfig(void)
+{
+  LL_UTILS_ClkInitTypeDef UTILS_ClkInitStruct;
+
+  LL_RCC_HSI_Enable();
+  /* Change this value to adjust frequency */
+  LL_RCC_HSI_SetCalibFreq(LL_RCC_HSICALIBRATION_24MHz);
+  while(LL_RCC_HSI_IsReady() != 1);
+
+  UTILS_ClkInitStruct.AHBCLKDivider = LL_RCC_SYSCLK_DIV_1;
+  UTILS_ClkInitStruct.APB1CLKDivider = LL_RCC_APB1_DIV_1;
+  LL_PLL_ConfigSystemClock_HSI(&UTILS_ClkInitStruct);
+
+  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+
+  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL);
+
+  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+  /* Don't invoke this in FreeRTOS */
+  // LL_InitTick(48000000, 1000U);
+  /* Update global SystemCoreClock(or through SystemCoreClockUpdate function) */
+  LL_SetSystemCoreClock(48000000);
+}
+
+static void APP_GPIOConfig(void)
+{
+  LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOB);
+  LL_GPIO_SetPinMode(GPIOB, LL_GPIO_PIN_5, LL_GPIO_MODE_OUTPUT);
+}
+
+void APP_ErrorHandler(void)
+{
+  while (1);
+}

Examples/FreeRTOS/Semaphore/LL_Mutex/main.h

@@ -0,0 +1,24 @@
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "py32f0xx_ll_rcc.h"
+#include "py32f0xx_ll_bus.h"
+#include "py32f0xx_ll_system.h"
+#include "py32f0xx_ll_exti.h"
+#include "py32f0xx_ll_cortex.h"
+#include "py32f0xx_ll_utils.h"
+#include "py32f0xx_ll_pwr.h"
+#include "py32f0xx_ll_dma.h"
+#include "py32f0xx_ll_gpio.h"
+
+void APP_ErrorHandler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */

Examples/FreeRTOS/Semaphore/LL_Mutex/py32f0xx_it.c

@@ -0,0 +1,17 @@
+#include "main.h"
+#include "py32f0xx_it.h"
+
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  while (1);
+}

Examples/FreeRTOS/Semaphore/LL_Mutex/py32f0xx_it.h

@@ -0,0 +1,16 @@
+#ifndef __PY32F0XX_IT_H
+#define __PY32F0XX_IT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PY32F0XX_IT_H */

Libraries/BSP_LL/Inc/py32f0xx_bsp_printf.h

@@ -59,6 +59,11 @@ extern "C" {
 
 void            BSP_USART_Config(uint32_t baudRate);
 
+void            BSP_UART_TxChar(char ch);
+void            BSP_UART_TxHex8(uint8_t hex);
+void            BSP_UART_TxHex16(uint16_t hex);
+void            BSP_UART_TxHex32(uint32_t hex);
+void            BSP_UART_TxString(char *str);
 
 #ifdef __cplusplus
 }

Libraries/BSP_LL/Src/py32f0xx_bsp_printf.c

@@ -3,6 +3,46 @@
 #include <errno.h>
 #include "py32f0xx_bsp_printf.h"
 
+const char HEX_TABLE[16] = { '0','1','2','3','4','5','6','7','8','9','A','B','C','D','E','F'};
+
+void BSP_UART_TxChar(char ch)
+{
+    LL_USART_TransmitData8(DEBUG_USART, ch);
+    while (!LL_USART_IsActiveFlag_TC(DEBUG_USART));
+    LL_USART_ClearFlag_TC(DEBUG_USART);
+}
+
+void BSP_UART_TxHex8(uint8_t hex)
+{
+    BSP_UART_TxChar(HEX_TABLE[(hex >> 4) & 0x0F]);
+    BSP_UART_TxChar(HEX_TABLE[hex & 0x0F]);
+}
+
+void BSP_UART_TxHex16(uint16_t hex)
+{
+    BSP_UART_TxChar(HEX_TABLE[(hex >> 12) & 0x0F]);
+    BSP_UART_TxChar(HEX_TABLE[(hex >> 8) & 0x0F]);
+    BSP_UART_TxChar(HEX_TABLE[(hex >> 4) & 0x0F]);
+    BSP_UART_TxChar(HEX_TABLE[hex & 0xF]);
+}
+
+void BSP_UART_TxHex32(uint32_t hex)
+{
+    BSP_UART_TxChar(HEX_TABLE[(hex >> 28) & 0x0F]);
+    BSP_UART_TxChar(HEX_TABLE[(hex >> 24) & 0x0F]);
+    BSP_UART_TxChar(HEX_TABLE[(hex >> 20) & 0x0F]);
+    BSP_UART_TxChar(HEX_TABLE[(hex >> 16) & 0x0F]);
+    BSP_UART_TxChar(HEX_TABLE[(hex >> 12) & 0x0F]);
+    BSP_UART_TxChar(HEX_TABLE[(hex >> 8) & 0x0F]);
+    BSP_UART_TxChar(HEX_TABLE[(hex >> 4) & 0x0F]);
+    BSP_UART_TxChar(HEX_TABLE[hex & 0xF]);
+}
+
+void BSP_UART_TxString(char *str)
+{
+    while (*str) BSP_UART_TxChar(*str++);
+}
+
 /**
   * @brief  DEBUG_USART GPIO Config,Mode Config,115200 8-N-1
   * @param  None