diff --git a/Examples/HAL/SPI/Waveshare_1.54_EPaper/EPD_Config.h b/Examples/HAL/SPI/Waveshare_1.54_EPaper/EPD_Config.h
new file mode 100644
index 0000000..0fe922f
--- /dev/null
+++ b/Examples/HAL/SPI/Waveshare_1.54_EPaper/EPD_Config.h
@@ -0,0 +1,126 @@
+/*****************************************************************************
+* | File      	:   EPD_Config.h
+* | Author      :   Waveshare team
+* | Function    :   Hardware underlying interface
+* | Info        :
+*                Used to shield the underlying layers of each master 
+*                and enhance portability
+*----------------
+* |	This version:   V2.0
+* | Date        :   2018-10-30
+* | Info        :
+* 1.add:
+*   UBYTE\UWORD\UDOUBLE
+* 2.Change:
+*   EPD_RST -> EPD_RST_PIN
+*   EPD_DC -> EPD_DC_PIN
+*   EPD_CS -> EPD_CS_PIN
+*   EPD_BUSY -> EPD_BUSY_PIN
+* 3.Remote:
+*   EPD_RST_1\EPD_RST_0
+*   EPD_DC_1\EPD_DC_0
+*   EPD_CS_1\EPD_CS_0
+*   EPD_BUSY_1\EPD_BUSY_0
+* 3.add:
+*   #define DEV_Digital_Write(_pin, _value) bcm2835_gpio_write(_pin, _value)
+*   #define DEV_Digital_Read(_pin) bcm2835_gpio_lev(_pin)
+*   #define DEV_SPI_WriteByte(__value) bcm2835_spi_transfer(__value)
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+******************************************************************************/
+#ifndef _EPD_CONFIG_H_
+#define _EPD_CONFIG_H_
+
+#include <stdint.h>
+#include <stdio.h>
+#include "main.h"
+#include "py32f0xx_hal_spi.h"
+
+/**
+ * Uncomment to enable the part
+*/
+// #define EPD_1IN02
+// #define EPD_1IN54_V2
+#define EPD_1IN54
+// #define EPD_1IN54B_V2
+// #define EPD_1IN54B
+// #define EPD_1IN54C
+// #define EPD_1IN64G
+// #define EPD_2IN7_V2
+// #define EPD_2IN7
+// #define EPD_2IN7B_V2
+// #define EPD_2IN7B
+// #define EPD_2IN9_V2
+// #define EPD_2IN9
+// #define EPD_2IN9B_V3
+// #define EPD_2IN9BC
+// #define EPD_2IN9D
+// #define EPD_2IN13_V2
+// #define EPD_2IN13_V3
+// #define EPD_2IN13
+// #define EPD_2IN13B_V3
+// #define EPD_2IN13B_V4
+// #define EPD_2IN13BC
+// #define EPD_2IN13D
+// #define EPD_2IN36G
+// #define EPD_2IN66
+// #define EPD_2IN66B
+// #define EPD_3IN0G
+// #define EPD_3IN7
+// #define EPD_3IN52
+// #define EPD_4IN01F
+// #define EPD_4IN2
+// #define EPD_4IN2B_V2
+// #define EPD_4IN2BC
+// #define EPD_4IN37G
+// #define EPD_5IN65F
+// #define EPD_5IN83_V2
+// #define EPD_5IN83
+// #define EPD_5IN83B_V2
+// #define EPD_5IN83BC
+// #define EPD_7IN3F
+// #define EPD_7IN3G
+// #define EPD_7IN5_HD
+// #define EPD_7IN5_V2
+// #define EPD_7IN5
+// #define EPD_7IN5B_HD
+// #define EPD_7IN5B_V2
+// #define EPD_7IN5BC
+
+#define EPD_DEBUG 1
+
+/**
+ * e-Paper GPIO
+ */
+#define EPD_RST_PIN     GPIOA, GPIO_PIN_0
+#define EPD_DC_PIN      GPIOA, GPIO_PIN_5
+#define EPD_CS_PIN      GPIOA, GPIO_PIN_6
+#define EPD_BUSY_PIN    GPIOA, GPIO_PIN_4
+
+/**
+ * GPIO read and write
+ */
+#define EPD_Digital_Write(_pin, _value) HAL_GPIO_WritePin(_pin, _value)
+#define EPD_Digital_Read(_pin)          HAL_GPIO_ReadPin(_pin)
+
+#define EPD_SPI_WriteByte(_value)       SPI_TxRxByte(_value)
+#define EPD_Delay_ms(__xms)             HAL_Delay(__xms)
+
+#endif
diff --git a/Examples/HAL/SPI/Waveshare_1.54_EPaper/main.c b/Examples/HAL/SPI/Waveshare_1.54_EPaper/main.c
new file mode 100644
index 0000000..1fd2530
--- /dev/null
+++ b/Examples/HAL/SPI/Waveshare_1.54_EPaper/main.c
@@ -0,0 +1,110 @@
+/***
+ * Demo: Waveshare 1.54' E-Paper
+ * 
+ * PY32          E-Paper
+ * PA0   ------> Reset 
+ * PA1   ------> SCL/SCK
+ * PA4   ------> Busy
+ * PA5   ------> DC/A0
+ * PA6   ------> CSN
+ * PA7   ------> SDA/MOSI
+ * 
+ * PA2   ------> TX
+ * PA3   ------> RX
+ */
+#include "main.h"
+#include "py32f0xx_hal_spi.h"
+#include "py32f0xx_bsp_clock.h"
+#include "py32f0xx_bsp_printf.h"
+#include "EPD_Test.h"
+
+
+SPI_HandleTypeDef spi1Handle;
+
+static void APP_GPIO_Config(void);
+static void APP_SPI_Config(void);
+
+int main(void)
+{
+  HAL_Init();
+  BSP_HSI_PLL_48MHzClockConfig();
+  BSP_USART_Config();
+  printf("SystemClk:%ld\r\n", SystemCoreClock);
+
+  APP_GPIO_Config();
+  APP_SPI_Config();
+
+  EPD_test();
+
+  while (1);
+}
+
+void SPI_TxRxByte(uint8_t data)
+{
+  HAL_SPI_Transmit(&spi1Handle, &data, 1, HAL_MAX_DELAY);
+}
+
+static void APP_GPIO_Config(void)
+{
+  GPIO_InitTypeDef GPIO_InitStruct;
+
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  // PA0 RESET
+  GPIO_InitStruct.Pin = GPIO_PIN_0;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  // PA5 DC/A0
+  GPIO_InitStruct.Pin = GPIO_PIN_5;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  // PA6 CS
+  GPIO_InitStruct.Pin = GPIO_PIN_6;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* PA4 Busy (input) */
+  GPIO_InitStruct.Pin = GPIO_PIN_4;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+}
+
+static void APP_SPI_Config(void)
+{
+  spi1Handle.Instance               = SPI1;
+  spi1Handle.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4;
+  spi1Handle.Init.Direction         = SPI_DIRECTION_1LINE;
+  spi1Handle.Init.CLKPolarity       = SPI_POLARITY_LOW;
+  spi1Handle.Init.CLKPhase          = SPI_PHASE_1EDGE;
+  spi1Handle.Init.DataSize          = SPI_DATASIZE_8BIT;
+  spi1Handle.Init.FirstBit          = SPI_FIRSTBIT_MSB;
+  spi1Handle.Init.NSS               = SPI_NSS_SOFT;
+  spi1Handle.Init.Mode              = SPI_MODE_MASTER;
+  if (HAL_SPI_DeInit(&spi1Handle) != HAL_OK)
+  {
+    APP_ErrorHandler();
+  }
+  if (HAL_SPI_Init(&spi1Handle) != HAL_OK)
+  {
+    APP_ErrorHandler();
+  }
+}
+
+void APP_ErrorHandler(void)
+{
+  while (1);
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Export assert error source and line number
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+  /* printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  while (1);
+}
+#endif /* USE_FULL_ASSERT */
diff --git a/Examples/HAL/SPI/Waveshare_1.54_EPaper/main.h b/Examples/HAL/SPI/Waveshare_1.54_EPaper/main.h
new file mode 100644
index 0000000..43accfd
--- /dev/null
+++ b/Examples/HAL/SPI/Waveshare_1.54_EPaper/main.h
@@ -0,0 +1,17 @@
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "py32f0xx_hal.h"
+
+void APP_ErrorHandler(void);
+void SPI_TxRxByte(uint8_t data);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
diff --git a/Examples/HAL/SPI/Waveshare_1.54_EPaper/py32f0xx_hal_conf.h b/Examples/HAL/SPI/Waveshare_1.54_EPaper/py32f0xx_hal_conf.h
new file mode 100644
index 0000000..ada3c3f
--- /dev/null
+++ b/Examples/HAL/SPI/Waveshare_1.54_EPaper/py32f0xx_hal_conf.h
@@ -0,0 +1,229 @@
+/**
+  ******************************************************************************
+  * @file    py32f0xx_hal_conf.h
+  * @author  MCU Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) Puya Semiconductor Co.
+  * All rights reserved.</center></h2>
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __PY32F0xx_HAL_CONF_H
+#define __PY32F0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED  
+#define HAL_RCC_MODULE_ENABLED
+/* #define HAL_ADC_MODULE_ENABLED */   
+/* #define HAL_CRC_MODULE_ENABLED */   
+/* #define HAL_COMP_MODULE_ENABLED */  
+#define HAL_FLASH_MODULE_ENABLED   
+#define HAL_GPIO_MODULE_ENABLED    
+/* #define HAL_IWDG_MODULE_ENABLED */  
+/* #define HAL_WWDG_MODULE_ENABLED */ 
+#define HAL_TIM_MODULE_ENABLED 
+#define HAL_DMA_MODULE_ENABLED
+/* #define HAL_LPTIM_MODULE_ENABLED */  
+#define HAL_PWR_MODULE_ENABLED
+/* #define HAL_I2C_MODULE_ENABLED */
+#define HAL_UART_MODULE_ENABLED 
+#define HAL_SPI_MODULE_ENABLED
+/* #define HAL_RTC_MODULE_ENABLED */   
+/* #define HAL_LED_MODULE_ENABLED */ 
+/* #define HAL_EXTI_MODULE_ENABLED */
+#define HAL_CORTEX_MODULE_ENABLED
+  
+/* ########################## Oscillator Values adaptation ####################*/
+
+#if !defined  (HSI_VALUE) 
+  #define HSI_VALUE              ((uint32_t)8000000)     /*!< Value of the Internal oscillator in Hz */
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE              ((uint32_t)24000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)200)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Low Speed Internal oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE) 
+ #define LSI_VALUE               ((uint32_t)32768)    /*!< LSI Typical Value in Hz */
+#endif /* LSI_VALUE */                               /*!< Value of the Internal Low Speed oscillator in Hz
+                                                     The real value may vary depending on the variations
+                                                     in voltage and temperature. */
+
+/**
+  * @brief Adjust the value of External Low Speed oscillator (LSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency  
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE              ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE               ((uint32_t)3300) /*!< Value of VDD in mv */           
+#define  PRIORITY_HIGHEST        0
+#define  PRIORITY_HIGH           1
+#define  PRIORITY_LOW            2
+#define  PRIORITY_LOWEST         3
+#define  TICK_INT_PRIORITY       ((uint32_t)PRIORITY_LOWEST)    /*!< tick interrupt priority (lowest by default)  */            
+#define  USE_RTOS                0
+#define  PREFETCH_ENABLE         0
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT       1U */
+
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+#ifdef HAL_MODULE_ENABLED
+ #include "py32f0xx_hal.h"
+#endif /* HAL_MODULE_ENABLED */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "py32f0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+ #include "py32f0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "py32f0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "py32f0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "py32f0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "py32f0xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "py32f0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+#include "py32f0xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "py32f0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "py32f0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "py32f0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "py32f0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "py32f0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */    
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "py32f0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "py32f0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "py32f0xx_hal_lptim.h" 
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "py32f0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "py32f0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "py32f0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PY32F0xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT Puya *****END OF FILE******************/
diff --git a/Examples/HAL/SPI/Waveshare_1.54_EPaper/py32f0xx_hal_msp.c b/Examples/HAL/SPI/Waveshare_1.54_EPaper/py32f0xx_hal_msp.c
new file mode 100644
index 0000000..aa96d48
--- /dev/null
+++ b/Examples/HAL/SPI/Waveshare_1.54_EPaper/py32f0xx_hal_msp.c
@@ -0,0 +1,61 @@
+/**
+  ******************************************************************************
+  * @file    py32f0xx_hal_msp.c
+  * @author  MCU Application Team
+  * @brief   This file provides code for the MSP Initialization
+  *          and de-Initialization codes.
+  ******************************************************************************
+  */
+
+#include "main.h"
+
+extern SPI_HandleTypeDef spi1Handle;
+
+/**
+  * @brief  Configure the Flash prefetch and the Instruction cache,
+  *         the time base source, NVIC and any required global low level hardware
+  *         by calling the HAL_MspInit() callback function from HAL_Init()
+  *         
+  */
+void HAL_MspInit(void)
+{
+  
+}
+
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi)
+{
+  GPIO_InitTypeDef  GPIO_InitStruct;
+
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_SPI1_CLK_ENABLE();
+
+  /*
+ * PA0   ------> Reset 
+ * PA1   ------> SCL/SCK
+ * PA4   ------> Busy
+ * PA5   ------> DC/A0
+ * PA6   ------> CSN
+ * PA7   ------> SDA/MOSI
+  */
+  /* PA1 SCL/SCK */
+  GPIO_InitStruct.Pin       = GPIO_PIN_1;
+  if (hspi->Init.CLKPolarity == SPI_POLARITY_LOW)
+  {
+    GPIO_InitStruct.Pull = GPIO_PULLDOWN;
+  }
+  else
+  {
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+  }
+  GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Speed     = GPIO_SPEED_FREQ_HIGH;
+  GPIO_InitStruct.Alternate = GPIO_AF0_SPI1;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* PA7 SDA/MOSI */
+  GPIO_InitStruct.Pin       = GPIO_PIN_7;
+  GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Speed     = GPIO_SPEED_FREQ_HIGH;
+  GPIO_InitStruct.Alternate = GPIO_AF0_SPI1;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+}
diff --git a/Examples/HAL/SPI/Waveshare_1.54_EPaper/py32f0xx_it.c b/Examples/HAL/SPI/Waveshare_1.54_EPaper/py32f0xx_it.c
new file mode 100644
index 0000000..2a0c9f6
--- /dev/null
+++ b/Examples/HAL/SPI/Waveshare_1.54_EPaper/py32f0xx_it.c
@@ -0,0 +1,85 @@
+/**
+  ******************************************************************************
+  * @file    py32f0xx_it.c
+  * @author  MCU Application Team
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) Puya Semiconductor Co.
+  * All rights reserved.</center></h2>
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "py32f0xx_hal.h"
+#include "py32f0xx_it.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private user code ---------------------------------------------------------*/
+/* External variables --------------------------------------------------------*/
+
+/******************************************************************************/
+/*          Cortex-M0+ Processor Interruption and Exception Handlers          */
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  HAL_IncTick();
+}
+
+/******************************************************************************/
+/* PY32F0xx Peripheral Interrupt Handlers                                     */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file.                                          */
+/******************************************************************************/
+
+/************************ (C) COPYRIGHT Puya *****END OF FILE******************/
diff --git a/Examples/HAL/SPI/Waveshare_1.54_EPaper/py32f0xx_it.h b/Examples/HAL/SPI/Waveshare_1.54_EPaper/py32f0xx_it.h
new file mode 100644
index 0000000..447d294
--- /dev/null
+++ b/Examples/HAL/SPI/Waveshare_1.54_EPaper/py32f0xx_it.h
@@ -0,0 +1,48 @@
+/**
+  ******************************************************************************
+  * @file    py32f0xx_it.h
+  * @author  MCU Application Team
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) Puya Semiconductor Co.
+  * All rights reserved.</center></h2>
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __PY32F0XX_IT_H
+#define __PY32F0XX_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Private includes ----------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void SVC_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PY32F0XX_IT_H */
+
+/************************ (C) COPYRIGHT Puya *****END OF FILE******************/