/**
  ******************************************************************************
  * @file    py32f0xx.h
  * @brief   CMSIS PY32F0xx Device Peripheral Access Layer Header File.
  * @version v1.0.0
  *
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) Puya Semiconductor Co.
  * All rights reserved.</center></h2>
  *
  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

/** @addtogroup CMSIS
  * @{
  */

/** @addtogroup py32f0xx
  * @{
  */

#ifndef __PY32F0XX_H
#define __PY32F0XX_H

#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */

/** @addtogroup Library_configuration_section
  * @{
  */

/**
  * @brief PY32 Family
  */
#if !defined  (PY32F0)
#define PY32F0
#endif /* PY32F0 */

#if (defined(PY32F030x3) || defined(PY32F030x4) || defined(PY32F030x6) || defined(PY32F030x7) || defined(PY32F030x8))
#define PY32F030PRE
#elif (defined(PY32F003x4) || defined(PY32F003x6) || defined(PY32F003x8))
#define PY32F003PRE
#elif (defined(PY32F072xB))
#define PY32F072PRE
#elif (defined(PY32F002Ax5))
#define PY32F002APRE
#endif

/* Uncomment the line below according to the target PY32 device used in your
   application
  */

#if !defined (PY32F030x3) && !defined (PY32F030x4) && !defined (PY32F030x6) && !defined (PY32F030x7) && !defined (PY32F030x8) && !defined (PY32F030xx) && \
    !defined (PY32F003x4) && !defined (PY32F003x6) && !defined (PY32F003x8) && \
    !defined (PY32F072xB) && \
    !defined (PY32F002Ax5)
/* #define PY32F030x3  */  /*!< PY32F030x3  Devices (PY32F030xx  microcontrollers where the Flash memory is 8 Kbytes)               */
/* #define PY32F030x4  */  /*!< PY32F030x4  Devices (PY32F030xx  microcontrollers where the Flash memory is 16 Kbytes)              */
/* #define PY32F030x6  */  /*!< PY32F030x6  Devices (PY32F030xx  microcontrollers where the Flash memory is 32 Kbytes)              */
/* #define PY32F030x7  */  /*!< PY32F030x7  Devices (PY32F030xx  microcontrollers where the Flash memory is 48 Kbytes)              */
/* #define PY32F030x8  */  /*!< PY32F030x8  Devices (PY32F030xx  microcontrollers where the Flash memory is 64 Kbytes)              */
/* #define PY32F003x4  */  /*!< PY32F003x4  Devices (PY32F003xx  microcontrollers where the Flash memory is 16 Kbytes)              */
/* #define PY32F003x6  */  /*!< PY32F003x6  Devices (PY32F003xx  microcontrollers where the Flash memory is 32 Kbytes)              */
/* #define PY32F003x8  */  /*!< PY32F003x8  Devices (PY32F003xx  microcontrollers where the Flash memory is 64 Kbytes)              */
/* #define PY32F072xB  */  /*!< PY32F072xB  Devices (PY32F072xx  microcontrollers where the Flash memory is 128 Kbytes)             */
/* #define PY32F002Ax5 */  /*!< PY32F002Ax5 Devices (PY32F002Ax5 microcontrollers where the Flash memory is 20 Kbytes)              */
#endif

/*  Tip: To avoid modifying this file each time you need to switch between these
        devices, you can define the device in your toolchain compiler preprocessor.
  */
#if !defined  (USE_HAL_DRIVER)
/**
 * @brief Comment the line below if you will not use the peripherals drivers.
   In this case, these drivers will not be included and the application code will
   be based on direct access to peripherals registers
   */
/*#define USE_HAL_DRIVER */
#endif /* USE_HAL_DRIVER */

/**
  * @brief CMSIS Device version number V1.0.0
  */
#define __PY32F0_DEVICE_VERSION_MAIN   (0x01) /*!< [31:24] main version */
#define __PY32F0_DEVICE_VERSION_SUB1   (0x00) /*!< [23:16] sub1 version */
#define __PY32F0_DEVICE_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
#define __PY32F0_DEVICE_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
#define __PY32F0_DEVICE_VERSION        ((__PY32F0_DEVICE_VERSION_MAIN << 24)\
                                        |(__PY32F0_DEVICE_VERSION_SUB1 << 16)\
                                        |(__PY32F0_DEVICE_VERSION_SUB2 << 8 )\
                                        |(__PY32F0_DEVICE_VERSION_RC))

/**
  * @}
  */

/** @addtogroup Device_Included
  * @{
  */

#if defined(PY32F030x3)
#include "py32f030x3.h"
#elif defined(PY32F030x4)
#include "py32f030x4.h"
#elif defined(PY32F030x6)
#include "py32f030x6.h"
#elif defined(PY32F030x7)
#include "py32f030x7.h"
#elif defined(PY32F030x8)
#include "py32f030x8.h"
#elif defined(PY32F003x4)
#include "py32f003x4.h"
#elif defined(PY32F003x6)
#include "py32f003x6.h"
#elif defined(PY32F003x8)
#include "py32f003x8.h"
#elif defined(PY32F072xB)
#include "py32f072xB.h"
#elif defined(PY32F002Ax5)
#include "py32f002ax5.h"
#else
#error "Please select first the target PY32F0xx device used in your application (in py32f0xx.h file)"
#endif

/**
  * @}
  */

/** @addtogroup Exported_types
  * @{
  */
typedef enum
{
  RESET = 0,
  SET = !RESET
} FlagStatus, ITStatus;

typedef enum
{
  DISABLE = 0,
  ENABLE = !DISABLE
} FunctionalState;
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))

typedef enum
{
  ERROR = 0,
  SUCCESS = !ERROR
} ErrorStatus;

/**
  * @}
  */


/** @addtogroup Exported_macros
  * @{
  */
#define SET_BIT(REG, BIT)     ((REG) |= (BIT))

#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))

#define READ_BIT(REG, BIT)    ((REG) & (BIT))

#define CLEAR_REG(REG)        ((REG) = (0x0))

#define WRITE_REG(REG, VAL)   ((REG) = (VAL))

#define READ_REG(REG)         ((REG))

#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))

#define HW32_REG(ADDRESS)     ( * ((volatile unsigned           int * )(ADDRESS)))

#define HW16_REG(ADDRESS)     ( * ((volatile unsigned short     int * )(ADDRESS)))

#define HW8_REG(ADDRESS)      ( * ((volatile unsigned          char * )(ADDRESS)))

/**
  * @}
  */

#if defined (USE_HAL_DRIVER)
 #include "py32f0xx_hal.h"
#endif /* USE_HAL_DRIVER */


#ifdef __cplusplus
}
#endif /* __cplusplus */

#endif /* __PY32F0xx_H */
/**
  * @}
  */

/**
  * @}
  */


/************************ (C) COPYRIGHT Puya *****END OF FILE******************/