#include "py32f0xx_bsp_led.h"


GPIO_TypeDef* LED_PORT[LEDn] = {LED3_GPIO_PORT};
const uint16_t LED_PIN[LEDn] = {LED3_PIN};


/**
  * @brief  Configures LED GPIO.
  * @param  Led Specifies the Led to be configured.
  *         This parameter can be one of following parameters:
  *         @arg  LED3
  * @retval None
  */
void BSP_LED_Init(Led_TypeDef Led)
{
  GPIO_InitTypeDef  GPIO_InitStruct;

  /* Enable the GPIO_LED Clock */
  LEDx_GPIO_CLK_ENABLE(Led);

  /* Configure the GPIO_LED pin */
  GPIO_InitStruct.Pin = LED_PIN[Led];
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;

  HAL_GPIO_Init(LED_PORT[Led], &GPIO_InitStruct);
  HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_SET);
}

/**
  * @brief  DeInitialize LED GPIO.
  * @param  Led Specifies the Led to be deconfigured.
  *         This parameter can be one of the following values:
  *         @arg  LED3
  * @note BSP_LED_DeInit() does not disable the GPIO clock
  * @retval None
  */
void BSP_LED_DeInit(Led_TypeDef Led)
{
  GPIO_InitTypeDef  GPIO_InitStruct;

  /* Turn off LED */
  HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_RESET);
  /* DeInit the GPIO_LED pin */
  GPIO_InitStruct.Pin = LED_PIN[Led];
  HAL_GPIO_DeInit(LED_PORT[Led], GPIO_InitStruct.Pin);
}

/**
  * @brief  Turns selected LED On.
  * @param  Led Specifies the Led to be set on.
  *   This parameter can be one of following parameters:
  *   @arg  LED3
  * @retval None
  */
void BSP_LED_On(Led_TypeDef Led)
{
  HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_RESET);
}

/**
  * @brief  Turns selected LED Off.
  * @param  Led Specifies the Led to be set off.
  *   This parameter can be one of following parameters:
  *            @arg  LED3
  * @retval None
  */
void BSP_LED_Off(Led_TypeDef Led)
{
  HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_SET);
}

/**
  * @brief  Toggles the selected LED.
  * @param  Led Specifies the Led to be toggled.
  *   This parameter can be one of following parameters:
  *            @arg  LED3
  * @retval None
  */
void BSP_LED_Toggle(Led_TypeDef Led)
{
  HAL_GPIO_TogglePin(LED_PORT[Led], LED_PIN[Led]);
}