/**
  ******************************************************************************
  * @file    py32f0xx_hal_rtc_ex.c
  * @author  MCU Application Team
  * @brief   Extended RTC HAL module driver.
  *          This file provides firmware functions to manage the following
  *          functionalities of the Real Time Clock (RTC) Extension peripheral:
  *           + RTC Tamper functions
  *           + Extension Control functions
  *           + Extension RTC features functions
  *
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) Puya Semiconductor Co.
  * All rights reserved.</center></h2>
  *
  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "py32f0xx_hal.h"

/** @addtogroup PY32F0xx_HAL_Driver
  * @{
  */

#ifdef HAL_RTC_MODULE_ENABLED

/** @defgroup RTCEx RTCEx
  * @brief RTC Extended HAL module driver
  * @{
  */

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
  * @{
  */
/**
  * @}
  */

/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/

/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
  * @{
  */

/** @defgroup RTCEx_Exported_Functions_Group2 RTC Second functions
  * @brief    RTC Second functions
  *
@verbatim
 ===============================================================================
                 ##### RTC Second functions #####
 ===============================================================================

 [..] This section provides functions implementing second interupt handlers

@endverbatim
  * @{
  */

/**
  * @brief  Sets Interrupt for second
  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
  *                the configuration information for RTC.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc)
{
  /* Check input parameters */
  if (hrtc == NULL)
  {
    return HAL_ERROR;
  }

  /* Process Locked */
  __HAL_LOCK(hrtc);

  hrtc->State = HAL_RTC_STATE_BUSY;

  /* Enable Second interuption */
  __HAL_RTC_SECOND_ENABLE_IT(hrtc, RTC_IT_SEC);

  hrtc->State = HAL_RTC_STATE_READY;

  /* Process Unlocked */
  __HAL_UNLOCK(hrtc);

  return HAL_OK;
}

/**
  * @brief  Deactivates Second.
  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
  *                the configuration information for RTC.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc)
{
  /* Check input parameters */
  if (hrtc == NULL)
  {
    return HAL_ERROR;
  }

  /* Process Locked */
  __HAL_LOCK(hrtc);

  hrtc->State = HAL_RTC_STATE_BUSY;

  /* Deactivate Second interuption*/
  __HAL_RTC_SECOND_DISABLE_IT(hrtc, RTC_IT_SEC);

  hrtc->State = HAL_RTC_STATE_READY;

  /* Process Unlocked */
  __HAL_UNLOCK(hrtc);

  return HAL_OK;
}

/**
  * @brief  This function handles second interrupt request.
  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
  *                the configuration information for RTC.
  * @retval None
  */
void HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef *hrtc)
{

  if (__HAL_RTC_SECOND_GET_IT_SOURCE(hrtc, RTC_IT_SEC))
  {
    /* Get the status of the Interrupt */
    if (__HAL_RTC_SECOND_GET_FLAG(hrtc, RTC_FLAG_SEC))
    {
      /* Check if Overrun occurred */
      if (__HAL_RTC_SECOND_GET_FLAG(hrtc, RTC_FLAG_OW))
      {
        /* Second error callback */
        HAL_RTCEx_RTCEventErrorCallback(hrtc);

        /* Clear flag Second */
        __HAL_RTC_OVERFLOW_CLEAR_FLAG(hrtc, RTC_FLAG_OW);

        /* Change RTC state */
        hrtc->State = HAL_RTC_STATE_ERROR;
      }
      else
      {
        /* Second callback */
        HAL_RTCEx_RTCEventCallback(hrtc);

        /* Change RTC state */
        hrtc->State = HAL_RTC_STATE_READY;
      }

      /* Clear flag Second */
      __HAL_RTC_SECOND_CLEAR_FLAG(hrtc, RTC_FLAG_SEC);
    }
  }
  if (__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRA))
  {
    /* Get the status of the Interrupt */
    if (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) != (uint32_t)RESET)
    {
      /* AlarmA callback */
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
      hrtc->AlarmAEventCallback(hrtc);
#else
      HAL_RTC_AlarmAEventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */

      /* Clear the Alarm interrupt pending bit */
      __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
    }
  }

}

/**
  * @brief  Second event callback.
  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
  *                the configuration information for RTC.
  * @retval None
  */
__weak void HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hrtc);
  /* NOTE : This function Should not be modified, when the callback is needed,
            the HAL_RTCEx_RTCEventCallback could be implemented in the user file
   */
}

/**
  * @brief  Second event error callback.
  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
  *                the configuration information for RTC.
  * @retval None
  */
__weak void HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc)
{
  /* Prevent unused argument(s) compilation warning */
  UNUSED(hrtc);
  /* NOTE : This function Should not be modified, when the callback is needed,
            the HAL_RTCEx_RTCEventErrorCallback could be implemented in the user file
   */
}

/**
  * @}
  */

/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions
  * @brief    Extended Peripheral Control functions
  *
@verbatim
 ===============================================================================
              ##### Extension Peripheral Control functions #####
 ===============================================================================
    [..]
    This subsection provides functions allowing to
      (+) Writes a data in a specified RTC Backup data register
      (+) Read a data in a specified RTC Backup data register
      (+) Sets the Smooth calibration parameters.

@endverbatim
  * @{
  */

/**
  * @brief  Sets the Smooth calibration parameters.
  * @param  hrtc: RTC handle
  * @param  SmoothCalibPeriod: Not used (only present for compatibility with another families)
  * @param  SmoothCalibPlusPulses: Not used (only present for compatibility with another families)
  * @param  SmouthCalibMinusPulsesValue: specifies the RTC Clock Calibration value.
  *          This parameter must be a number between 0 and 0x7F.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue)
{
  /* Check input parameters */
  if (hrtc == NULL)
  {
    return HAL_ERROR;
  }
  /* Prevent unused argument(s) compilation warning */
  UNUSED(SmoothCalibPeriod);
  UNUSED(SmoothCalibPlusPulses);

  /* Check the parameters */
  assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmouthCalibMinusPulsesValue));

  /* Process Locked */
  __HAL_LOCK(hrtc);

  hrtc->State = HAL_RTC_STATE_BUSY;

  /* Sets RTC Clock Calibration value.*/
  MODIFY_REG(RTC->BKP_RTCCR, BKP_RTCCR_CAL, SmouthCalibMinusPulsesValue);

  /* Change RTC state */
  hrtc->State = HAL_RTC_STATE_READY;

  /* Process Unlocked */
  __HAL_UNLOCK(hrtc);

  return HAL_OK;
}

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#endif /* HAL_RTC_MODULE_ENABLED */

/**
  * @}
  */

/************************ (C) COPYRIGHT Puya *****END OF FILE****/