luv090909/py32f0-template
1
0
Fork 0
mirror of https://github.com/IcedRooibos/py32f0-template.git synced 2025-10-29 08:52:04 -07:00
Code Issues Packages Projects Releases Wiki Activity
py32f0-template/Libraries/EPaper/Lib/EPD_5in83.c
IOsetting f879eebe17 feat: lib and demo of waveshare e-paper
2023-03-10 02:20:01 +08:00

273 lines
10 KiB
C
Raw Permalink Blame History

/*****************************************************************************
* | File : EPD_5in83.c
* | Author : Waveshare team
* | Function : 5.83inch e-paper
* | Info :
*----------------
* | This version: V3.0
* | Date : 2019-06-13
* | Info :
* -----------------------------------------------------------------------------
* V3.0(2019-06-13):
* 1.Change:
* EPD_Reset() => EPD_5IN83_Reset()
* EPD_SendCommand() => EPD_5IN83_SendCommand()
* EPD_SendData() => EPD_5IN83_SendData()
* EPD_WaitUntilIdle() => EPD_5IN83_ReadBusy()
* EPD_SetFullReg() => EPD_5IN83_SetFullReg()
* EPD_SetPartReg() => EPD_5IN83_SetPartReg()
* EPD_TurnOnDisplay() => EPD_5IN83_TurnOnDisplay()
* EPD_Init() => EPD_5IN83_Init()
* EPD_Clear() => EPD_5IN83_Clear()
* EPD_Display() => EPD_5IN83_Display()
* EPD_Sleep() => EPD_5IN83_Sleep()
* 2.remove commands define:
* #define PANEL_SETTING 0x00
* #define POWER_SETTING 0x01
* #define POWER_OFF 0x02
* #define POWER_OFF_SEQUENCE_SETTING 0x03
* #define POWER_ON 0x04
* #define POWER_ON_MEASURE 0x05
* #define BOOSTER_SOFT_START 0x06
* #define DEEP_SLEEP 0x07
* #define DATA_START_TRANSMISSION_1 0x10
* #define DATA_STOP 0x11
* #define DISPLAY_REFRESH 0x12
* #define DATA_START_TRANSMISSION_2 0x13
* #define VCOM_LUT 0x20
* #define W2W_LUT 0x21
* #define B2W_LUT 0x22
* #define W2B_LUT 0x23
* #define B2B_LUT 0x24
* #define PLL_CONTROL 0x30
* #define TEMPERATURE_SENSOR_CALIBRATION 0x40
* #define TEMPERATURE_SENSOR_SELECTION 0x41
* #define TEMPERATURE_SENSOR_WRITE 0x42
* #define TEMPERATURE_SENSOR_READ 0x43
* #define VCOM_AND_DATA_INTERVAL_SETTING 0x50
* #define LOW_POWER_DETECTION 0x51
* #define TCON_SETTING 0x60
* #define RESOLUTION_SETTING 0x61
* #define GET_STATUS 0x71
* #define AUTO_MEASURE_VCOM 0x80
* #define READ_VCOM_VALUE 0x81
* #define VCM_DC_SETTING 0x82
* #define PARTIAL_WINDOW 0x90
* #define PARTIAL_IN 0x91
* #define PARTIAL_OUT 0x92
* #define PROGRAM_MODE 0xA0
* #define ACTIVE_PROGRAM 0xA1
* #define READ_OTP_DATA 0xA2
* #define POWER_SAVING 0xE3
* -----------------------------------------------------------------------------
* V2.0(2018-11-09):
* 1.Remove:ImageBuff[EPD_HEIGHT * EPD_WIDTH / 8]
* 2.Change:EPD_Display(UBYTE *Image)
* Need to pass parameters: pointer to cached data
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
******************************************************************************/
#include "EPD_5in83.h"
#ifdef EPD_5IN83
/******************************************************************************
function : Software reset
parameter:
******************************************************************************/
static void EPD_5IN83_Reset(void)
{
EPD_Digital_Write(EPD_RST_PIN, 1);
EPD_Delay_ms(200);
EPD_Digital_Write(EPD_RST_PIN, 0);
EPD_Delay_ms(2);
EPD_Digital_Write(EPD_RST_PIN, 1);
EPD_Delay_ms(200);
}
/******************************************************************************
function : send command
parameter:
Reg : Command register
******************************************************************************/
static void EPD_5IN83_SendCommand(UBYTE Reg)
{
EPD_Digital_Write(EPD_DC_PIN, 0);
EPD_Digital_Write(EPD_CS_PIN, 0);
EPD_SPI_WriteByte(Reg);
EPD_Digital_Write(EPD_CS_PIN, 1);
}
/******************************************************************************
function : send data
parameter:
Data : Write data
******************************************************************************/
static void EPD_5IN83_SendData(UBYTE Data)
{
EPD_Digital_Write(EPD_DC_PIN, 1);
EPD_Digital_Write(EPD_CS_PIN, 0);
EPD_SPI_WriteByte(Data);
EPD_Digital_Write(EPD_CS_PIN, 1);
}
/******************************************************************************
function : Wait until the busy_pin goes LOW
parameter:
******************************************************************************/
static void EPD_5IN83_ReadBusy(void)
{
EPD_Printf("e-Paper busy\r\n");
while(EPD_Digital_Read(EPD_BUSY_PIN) == 0) { //LOW: idle, HIGH: busy
EPD_Delay_ms(100);
}
EPD_Printf("e-Paper busy release\r\n");
}
/******************************************************************************
function : Turn On Display
parameter:
******************************************************************************/
static void EPD_5IN83_TurnOnDisplay(void)
{
EPD_5IN83_SendCommand(0x12); // DISPLAY_REFRESH
EPD_Delay_ms(100);
EPD_5IN83_ReadBusy();
}
/******************************************************************************
function : Initialize the e-Paper register
parameter:
******************************************************************************/
void EPD_5IN83_Init(void)
{
EPD_5IN83_Reset();
EPD_5IN83_SendCommand(0x01); // POWER_SETTING
EPD_5IN83_SendData(0x37);
EPD_5IN83_SendData(0x00);
EPD_5IN83_SendCommand(0x00); // PANEL_SETTING
EPD_5IN83_SendData(0xCF);
EPD_5IN83_SendData(0x08);
EPD_5IN83_SendCommand(0x06); // BOOSTER_SOFT_START
EPD_5IN83_SendData(0xc7);
EPD_5IN83_SendData(0xcc);
EPD_5IN83_SendData(0x28);
EPD_5IN83_SendCommand(0x04); // POWER_ON
EPD_5IN83_ReadBusy();
EPD_5IN83_SendCommand(0x30); // PLL_CONTROL
EPD_5IN83_SendData(0x3c);
EPD_5IN83_SendCommand(0x41); // TEMPERATURE_CALIBRATION
EPD_5IN83_SendData(0x00);
EPD_5IN83_SendCommand(0x50); // VCOM_AND_DATA_INTERVAL_SETTING
EPD_5IN83_SendData(0x77);
EPD_5IN83_SendCommand(0x60); // TCON_SETTING
EPD_5IN83_SendData(0x22);
EPD_5IN83_SendCommand(0x61); // TCON_RESOLUTION
EPD_5IN83_SendData(EPD_5IN83_WIDTH >> 8); // source 600
EPD_5IN83_SendData(EPD_5IN83_WIDTH & 0xff);
EPD_5IN83_SendData(EPD_5IN83_HEIGHT >> 8); // gate 448
EPD_5IN83_SendData(EPD_5IN83_HEIGHT & 0xff);
EPD_5IN83_SendCommand(0x82); // VCM_DC_SETTING
EPD_5IN83_SendData(0x1E); // decide by LUT file
EPD_5IN83_SendCommand(0xe5); // FLASH MODE
EPD_5IN83_SendData(0x03);
}
/******************************************************************************
function : Clear screen
parameter:
******************************************************************************/
void EPD_5IN83_Clear(void)
{
UWORD Width, Height;
Width = (EPD_5IN83_WIDTH % 8 == 0)? (EPD_5IN83_WIDTH / 8 ): (EPD_5IN83_WIDTH / 8 + 1);
Height = EPD_5IN83_HEIGHT;
EPD_5IN83_SendCommand(0x10);
for (UWORD j = 0; j < Height; j++) {
for (UWORD i = 0; i < Width; i++) {
for(UBYTE k = 0; k < 4; k++) {
EPD_5IN83_SendData(0x33);
}
}
}
EPD_5IN83_TurnOnDisplay();
}
/******************************************************************************
function : Sends the image buffer in RAM to e-Paper and displays
parameter:
******************************************************************************/
void EPD_5IN83_Display(UBYTE *Image)
{
UBYTE Data_Black, Data;
UWORD Width, Height;
Width = (EPD_5IN83_WIDTH % 8 == 0)? (EPD_5IN83_WIDTH / 8 ): (EPD_5IN83_WIDTH / 8 + 1);
Height = EPD_5IN83_HEIGHT;
EPD_5IN83_SendCommand(0x10);
for (UWORD j = 0; j < Height; j++) {
for (UWORD i = 0; i < Width; i++) {
Data_Black = ~Image[i + j * Width];
for(UBYTE k = 0; k < 8; k++) {
if(Data_Black & 0x80)
Data = 0x00;
else
Data = 0x03;
Data <<= 4;
Data_Black <<= 1;
k++;
if(Data_Black & 0x80)
Data |= 0x00;
else
Data |= 0x03;
Data_Black <<= 1;
EPD_5IN83_SendData(Data);
}
}
}
EPD_5IN83_TurnOnDisplay();
}
/******************************************************************************
function : Enter sleep mode
parameter:
******************************************************************************/
void EPD_5IN83_Sleep(void)
{
EPD_5IN83_SendCommand(0x02); // POWER_OFF
EPD_5IN83_ReadBusy();
EPD_5IN83_SendCommand(0x07); // DEEP_SLEEP
EPD_5IN83_SendData(0XA5);
}
#endif
Reference in New Issue View Git Blame Copy Permalink