luv090909/py32f0-template
1
0
Fork 0
mirror of https://github.com/IcedRooibos/py32f0-template.git synced 2025-10-29 00:42:06 -07:00
Code Issues Packages Projects Releases Wiki Activity
py32f0-template/Libraries/PY32F0xx_LL_Driver/Inc/py32f0xx_ll_exti.h
IOsetting feb38b5b41 chore: bump to dfp.1.1.3
2023-01-11 23:45:54 +08:00

887 lines
31 KiB
C
Raw Blame History

/**
******************************************************************************
* @file py32f0xx_ll_exti.h
* @author MCU Application Team
* @brief Header file of RCC LL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) Puya Semiconductor Co.
* All rights reserved.</center></h2>
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef PY32F0XX_LL_EXTI_H
#define PY32F0XX_LL_EXTI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "py32f0xx.h"
/** @addtogroup py32f0xx_LL_Driver
* @{
*/
#if defined (EXTI)
/** @defgroup EXTI_LL EXTI
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
#define LL_EXTI_REGISTER_PINPOS_SHFT 8U /*!< Define used to shift pin position in EXTICR register */
#define LL_EXTI_REGISTER_PINMASK_SHFT 16U /*!< Define used to shift pin mask in EXTICR register */
/* Private Macros ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
* @{
*/
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported types ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
* @{
*/
typedef struct
{
uint32_t Line; /*!< Specifies the EXTI lines to be enabled or disabled for Lines
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
This parameter can be set either to ENABLE or DISABLE */
uint8_t Mode; /*!< Specifies the mode for the EXTI lines.
This parameter can be a value of @ref EXTI_LL_EC_MODE. */
uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
} LL_EXTI_InitTypeDef;
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
* @{
*/
/** @defgroup EXTI_LL_EC_LINE LINE
* @{
*/
#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */
#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */
#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */
#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */
#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */
#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */
#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */
#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */
#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */
#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */
#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */
#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */
#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */
#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */
#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */
#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */
#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */
#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */
#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */
#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */
#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */
#if defined(USE_FULL_LL_DRIVER)
#define LL_EXTI_LINE_NONE 0x00000000U /*!< None Extended line */
#endif /*USE_FULL_LL_DRIVER*/
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_EC_MODE Mode
* @{
*/
#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */
#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */
#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */
/**
* @}
*/
/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
* @{
*/
#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */
#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */
#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */
#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/** @defgroup EXTI_LL_EC_CONFIG_PORT EXTI CONFIG PORT
* @{
*/
#define LL_EXTI_CONFIG_PORTA 0x0U /*!< EXTI PORT A */
#define LL_EXTI_CONFIG_PORTB 0x1U /*!< EXTI PORT B */
#define LL_EXTI_CONFIG_PORTF 0x2U /*!< EXTI PORT F */
/**
* @}
*/
/** @defgroup EXTI_LL_EC_CONFIG_LINE EXTI CONFIG LINE
* @{
*/
#define LL_EXTI_CONFIG_LINE0 ((0x3U << LL_EXTI_REGISTER_PINMASK_SHFT) | ( 0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_MASK_3 | EXTI_POSITION_0 | EXTICR[0] */
#define LL_EXTI_CONFIG_LINE1 ((0x3U << LL_EXTI_REGISTER_PINMASK_SHFT) | ( 8U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_MASK_3 | EXTI_POSITION_8 | EXTICR[0] */
#define LL_EXTI_CONFIG_LINE2 ((0x3U << LL_EXTI_REGISTER_PINMASK_SHFT) | (16U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_MASK_3 | EXTI_POSITION_16 | EXTICR[0] */
#define LL_EXTI_CONFIG_LINE3 ((0x3U << LL_EXTI_REGISTER_PINMASK_SHFT) | (24U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /*!< EXTI_MASK_3 | EXTI_POSITION_24 | EXTICR[0] */
#define LL_EXTI_CONFIG_LINE4 ((0x3U << LL_EXTI_REGISTER_PINMASK_SHFT) | ( 0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_MASK_3 | EXTI_POSITION_0 | EXTICR[1] */
#define LL_EXTI_CONFIG_LINE5 ((0x1U << LL_EXTI_REGISTER_PINMASK_SHFT) | ( 8U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_MASK_1 | EXTI_POSITION_8 | EXTICR[1] */
#define LL_EXTI_CONFIG_LINE6 ((0x1U << LL_EXTI_REGISTER_PINMASK_SHFT) | (16U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_MASK_1 | EXTI_POSITION_16 | EXTICR[1] */
#define LL_EXTI_CONFIG_LINE7 ((0x1U << LL_EXTI_REGISTER_PINMASK_SHFT) | (24U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /*!< EXTI_MASK_1 | EXTI_POSITION_19 | EXTICR[1] */
#define LL_EXTI_CONFIG_LINE8 ((0x1U << LL_EXTI_REGISTER_PINMASK_SHFT) | ( 0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /*!< EXTI_MASK_1 | EXTI_POSITION_0 | EXTICR[2] */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
* @{
*/
/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
* @{
*/
/**
* @brief Write a value in EXTI register
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
/**
* @brief Read a value in EXTI register
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
* @{
*/
/** @defgroup EXTI_LL_EF_IT_Management IT_Management
* @{
*/
/**
* @brief Enable ExtiLine Interrupt request for Lines
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_29
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableIT(uint32_t ExtiLine)
{
SET_BIT(EXTI->IMR, ExtiLine);
}
/**
* @brief Disable ExtiLine Interrupt request for Lines
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_29
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableIT(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->IMR, ExtiLine);
}
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines
* Bits are set automatically at Power on.
* @rmtoll IMR1 IMx LL_EXTI_IsEnabledIT_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_29
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine));
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Event_Management Event_Management
* @{
*/
/**
* @brief Enable ExtiLine Event request for Lines
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_29
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableEvent(uint32_t ExtiLine)
{
SET_BIT(EXTI->EMR, ExtiLine);
}
/**
* @brief Disable ExtiLine Event request for Lines
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_29
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableEvent(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->EMR, ExtiLine);
}
/**
* @brief Indicate if ExtiLine Event request is enabled for Lines
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_29
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine));
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
* @{
*/
/**
* @brief Enable ExtiLine Rising Edge Trigger for Lines
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableRisingTrig(uint32_t ExtiLine)
{
SET_BIT(EXTI->RTSR, ExtiLine);
}
/**
* @brief Disable ExtiLine Rising Edge Trigger for Lines
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableRisingTrig(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->RTSR, ExtiLine);
}
/**
* @brief Check if rising edge trigger is enabled for Lines
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine));
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
* @{
*/
/**
* @brief Enable ExtiLine Falling Edge Trigger for Lines
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableFallingTrig(uint32_t ExtiLine)
{
SET_BIT(EXTI->FTSR, ExtiLine);
}
/**
* @brief Disable ExtiLine Falling Edge Trigger for Lines
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for the same interrupt line.
* In this case, both generate a trigger condition.
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableFallingTrig(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->FTSR, ExtiLine);
}
/**
* @brief Check if falling edge trigger is enabled for Lines
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine));
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
* @{
*/
/**
* @brief Generate a software Interrupt Event for Lines
* @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR
* resulting in an interrupt request generation.
* This bit is cleared by clearing the corresponding bit in the EXTI_PR
* register (by writing a 1 into the bit)
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_GenerateSWI(uint32_t ExtiLine)
{
SET_BIT(EXTI->SWIER, ExtiLine);
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
* @{
*/
/**
* @brief Check if the ExtLine Flag is set or not for Lines
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine));
}
/**
* @brief Read ExtLine Combination Flag for Lines
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @note Please check each device line mapping for EXTI Line availability
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag(uint32_t ExtiLine)
{
return (READ_BIT(EXTI->PR, ExtiLine));
}
/**
* @brief Clear ExtLine Flags for Lines
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_ClearFlag(uint32_t ExtiLine)
{
WRITE_REG(EXTI->PR, ExtiLine);
}
/**
* @brief Configure source input for the EXTI external interrupt.
* @param Port This parameter can be one of the following values:
* @arg @ref LL_EXTI_CONFIG_PORTA
* @arg @ref LL_EXTI_CONFIG_PORTB
* @arg @ref LL_EXTI_CONFIG_PORTF
* @param Line This parameter can be one of the following values:
* @arg @ref LL_EXTI_CONFIG_LINE0
* @arg @ref LL_EXTI_CONFIG_LINE1
* @arg @ref LL_EXTI_CONFIG_LINE2
* @arg @ref LL_EXTI_CONFIG_LINE3
* @arg @ref LL_EXTI_CONFIG_LINE4
* @arg @ref LL_EXTI_CONFIG_LINE5
* @arg @ref LL_EXTI_CONFIG_LINE6
* @arg @ref LL_EXTI_CONFIG_LINE7
* @arg @ref LL_EXTI_CONFIG_LINE8
* @retval None
*/
__STATIC_INLINE void LL_EXTI_SetEXTISource(uint32_t Port, uint32_t Line)
{
uint32_t mask = (Line >> LL_EXTI_REGISTER_PINMASK_SHFT) & 0xFF;
uint32_t pos = (Line >> LL_EXTI_REGISTER_PINPOS_SHFT) & 0xFF;
MODIFY_REG(EXTI->EXTICR[Line & 0x03u], (mask << pos), (Port << pos));
}
/**
* @brief Get the configured defined for specific EXTI Line
* @param Line This parameter can be one of the following values:
* @arg @ref LL_EXTI_CONFIG_LINE0
* @arg @ref LL_EXTI_CONFIG_LINE1
* @arg @ref LL_EXTI_CONFIG_LINE2
* @arg @ref LL_EXTI_CONFIG_LINE3
* @arg @ref LL_EXTI_CONFIG_LINE4
* @arg @ref LL_EXTI_CONFIG_LINE5
* @arg @ref LL_EXTI_CONFIG_LINE6
* @arg @ref LL_EXTI_CONFIG_LINE7
* @arg @ref LL_EXTI_CONFIG_LINE8
* @retval Returned value can be one of the following values:
* @arg @ref LL_EXTI_CONFIG_PORTA
* @arg @ref LL_EXTI_CONFIG_PORTB
* @arg @ref LL_EXTI_CONFIG_PORTF
*/
__STATIC_INLINE uint32_t LL_EXTI_GetEXTISource(uint32_t Line)
{
uint32_t mask = (Line >> LL_EXTI_REGISTER_PINMASK_SHFT) & 0xFF;
uint32_t pos = (Line >> LL_EXTI_REGISTER_PINPOS_SHFT) & 0xFF;
return (READ_BIT(EXTI->EXTICR[Line & 0x03u], (mask << pos)) >> pos);
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Config EF configuration functions
* @{
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
* @{
*/
uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
uint32_t LL_EXTI_DeInit(void);
void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/**
* @}
*/
/**
* @}
*/
#endif /* EXTI */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* PY32F0XX_LL_EXTI_H */
/************************ (C) COPYRIGHT Puya *****END OF FILE****/
Reference in New Issue View Git Blame Copy Permalink