luv090909/py32f0-template
1
0
Fork 0
mirror of https://github.com/IcedRooibos/py32f0-template.git synced 2025-10-28 00:12:05 -07:00
Code Issues Packages Projects Releases Wiki Activity
py32f0-template/Examples/LL/SPI/nRF24L01_Wireless_F003_SOP16/nrf24l01.c
Dhiru Kholia cf4c2d6bda feat: add nRF24L01_Wireless_F003_SOP16 TX example
2023-07-04 22:00:03 +05:30

590 lines
16 KiB
C
Raw Blame History

#include <stdio.h>
#include "nrf24l01.h"
#include "py32f0xx_bsp_printf.h"
uint8_t RX_BUF[NRF24L01_PLOAD_WIDTH];
uint8_t TX_BUF[NRF24L01_PLOAD_WIDTH];
void NRF24L01_Init(void)
{
CSN_HIGH;
}
/**
* Read a 1-bit register
*/
uint8_t NRF24L01_Read_Reg(uint8_t reg)
{
uint8_t value;
CSN_LOW;
SPI_TxRxByte(reg);
value = SPI_TxRxByte(NRF24L01_CMD_NOP);
CSN_HIGH;
return value;
}
/**
* Write a 1-byte register
*/
uint8_t NRF24L01_Write_Reg(uint8_t reg, uint8_t value)
{
uint8_t status;
CSN_LOW;
if (reg < NRF24L01_CMD_W_REGISTER)
{
// This is a register access
status = SPI_TxRxByte(NRF24L01_CMD_W_REGISTER | (reg & NRF24L01_MASK_REG_MAP));
SPI_TxRxByte(value);
}
else
{
// This is a single byte command or future command/register
status = SPI_TxRxByte(reg);
if ((reg != NRF24L01_CMD_FLUSH_TX)
&& (reg != NRF24L01_CMD_FLUSH_RX)
&& (reg != NRF24L01_CMD_REUSE_TX_PL)
&& (reg != NRF24L01_CMD_NOP)) {
// Send register value
SPI_TxRxByte(value);
}
}
CSN_HIGH;
return status;
}
/**
* Read a multi-byte register
* reg - register to read
* buf - pointer to the buffer to write
* len - number of bytes to read
*/
uint8_t NRF24L01_Read_To_Buf(uint8_t reg, uint8_t *buf, uint8_t len)
{
CSN_LOW;
uint8_t status = SPI_TxRxByte(reg);
while (len--)
{
*buf++ = SPI_TxRxByte(NRF24L01_CMD_NOP);
}
CSN_HIGH;
return status;
}
/**
* Write a multi-byte register
* reg - register to write
* buf - pointer to the buffer with data
* len - number of bytes to write
*/
uint8_t NRF24L01_Write_From_Buf(uint8_t reg, const uint8_t *buf, uint8_t len)
{
CSN_LOW;
uint8_t status = SPI_TxRxByte(reg);
while (len--)
{
SPI_TxRxByte(*buf++);
}
CSN_HIGH;
return status;
}
uint8_t NRF24L01_Check(void)
{
uint8_t rxbuf[5];
uint8_t i;
uint8_t *ptr = (uint8_t *)NRF24L01_TEST_ADDR;
// Write test TX address and read TX_ADDR register
NRF24L01_Write_From_Buf(NRF24L01_CMD_W_REGISTER | NRF24L01_REG_TX_ADDR, ptr, 5);
NRF24L01_Read_To_Buf(NRF24L01_CMD_R_REGISTER | NRF24L01_REG_TX_ADDR, rxbuf, 5);
// Compare buffers, return error on first mismatch
for (i = 0; i < 5; i++)
{
if (rxbuf[i] != *ptr++) return 1;
}
return 0;
}
/**
* Flush the RX FIFO
*/
void NRF24L01_FlushRX(void)
{
NRF24L01_Write_Reg(NRF24L01_CMD_FLUSH_RX, NRF24L01_CMD_NOP);
}
/**
* Flush the TX FIFO
*/
void NRF24L01_FlushTX(void)
{
NRF24L01_Write_Reg(NRF24L01_CMD_FLUSH_TX, NRF24L01_CMD_NOP);
}
void NRF24L01_ResetTX(void)
{
NRF24L01_Write_Reg(NRF24L01_REG_STATUS, NRF24L01_FLAG_MAX_RT); // Clear max retry flag
CE_LOW;
CE_HIGH;
}
/**
* Clear IRQ bit of the STATUS register
* reg - NRF24L01_FLAG_RX_DREADY
* NRF24L01_FLAG_TX_DSENT
* NRF24L01_FLAG_MAX_RT
*/
void NRF24L01_ClearIRQFlag(uint8_t reg)
{
NRF24L01_Write_Reg(NRF24L01_REG_STATUS, reg);
}
/**
* Clear RX_DR, TX_DS and MAX_RT bits of the STATUS register
*/
void NRF24L01_ClearIRQFlags(void)
{
uint8_t reg;
reg = NRF24L01_Read_Reg(NRF24L01_REG_STATUS);
reg |= NRF24L01_MASK_STATUS_IRQ;
NRF24L01_Write_Reg(NRF24L01_REG_STATUS, reg);
}
/**
* Common configurations of RX and TX, internal function
*/
void _NRF24L01_Config(uint8_t *tx_addr)
{
// TX Address
NRF24L01_Write_From_Buf(NRF24L01_CMD_W_REGISTER + NRF24L01_REG_TX_ADDR, tx_addr, NRF24L01_ADDR_WIDTH);
// RX P0 Payload Width
NRF24L01_Write_Reg(NRF24L01_REG_RX_PW_P0, NRF24L01_PLOAD_WIDTH);
// Enable Auto ACK
NRF24L01_Write_Reg(NRF24L01_REG_EN_AA, 0x3f);
// Enable RX channels
NRF24L01_Write_Reg(NRF24L01_REG_EN_RXADDR, 0x3f);
// RF channel: 2.400G + 0.001 * x
NRF24L01_Write_Reg(NRF24L01_REG_RF_CH, 40);
// Format: 000+0+[0:1Mbps,1:2Mbps]+[00:-18dbm,01:-12dbm,10:-6dbm,11:0dbm]+[0:LNA_OFF,1:LNA_ON]
// 01:1Mbps,-18dbm; 03:1Mbps,-12dbm; 05:1Mbps,-6dbm; 07:1Mbps,0dBm
// 09:2Mbps,-18dbm; 0b:2Mbps,-12dbm; 0d:2Mbps,-6dbm; 0f:2Mbps,0dBm,
NRF24L01_Write_Reg(NRF24L01_REG_RF_SETUP, 0x03);
// 0A:delay=250us,count=10, 1A:delay=500us,count=10
NRF24L01_Write_Reg(NRF24L01_REG_SETUP_RETR, 0x0a);
}
/**
* Switch NRF24L01 to RX mode
*/
void NRF24L01_RX_Mode(uint8_t *rx_addr, uint8_t *tx_addr)
{
CE_LOW;
_NRF24L01_Config(tx_addr);
// RX Address of P0
NRF24L01_Write_From_Buf(NRF24L01_CMD_W_REGISTER + NRF24L01_REG_RX_ADDR_P0, rx_addr, NRF24L01_ADDR_WIDTH);
/**
REG 0x00:
0)PRIM_RX 0:TX 1:RX
1)PWR_UP 0:OFF 1:ON
2)CRCO 0:8bit CRC 1:16bit CRC
3)EN_CRC Enabled if any of EN_AA is high
4)MASK_MAX_RT 0:IRQ low 1:NO IRQ
5)MASK_TX_DS 0:IRQ low 1:NO IRQ
6)MASK_RX_DR 0:IRQ low 1:NO IRQ
7)Reserved 0
*/
NRF24L01_Write_Reg(NRF24L01_REG_CONFIG, 0x0f); //RX,PWR_UP,CRC16,EN_CRC
CE_HIGH;
NRF24L01_FlushRX();
}
/**
* Switch NRF24L01 to TX mode
*/
void NRF24L01_TX_Mode(uint8_t *rx_addr, uint8_t *tx_addr)
{
CE_LOW;
_NRF24L01_Config(tx_addr);
// On the PTX the **TX_ADDR** must be the same as the **RX_ADDR_P0** and as the pipe address for the designated pipe
// RX_ADDR_P0 will be used for receiving ACK
NRF24L01_Write_From_Buf(NRF24L01_CMD_W_REGISTER + NRF24L01_REG_RX_ADDR_P0, tx_addr, NRF24L01_ADDR_WIDTH);
NRF24L01_Write_Reg(NRF24L01_REG_CONFIG, 0x0e); //TX,PWR_UP,CRC16,EN_CRC
CE_HIGH;
}
uint8_t NRF24L01_RX_GetPayloadWidth(void)
{
uint8_t value;
CSN_LOW;
value = NRF24L01_Read_Reg(NRF24L01_CMD_R_RX_PL_WID);
CSN_HIGH;
return value;
}
uint8_t NRF24L01_RXFIFO_GetStatus(void)
{
uint8_t reg = NRF24L01_Read_Reg(NRF24L01_REG_FIFO_STATUS);
return (reg & NRF24L01_MASK_RXFIFO);
}
uint8_t NRF24L01_ReadPayload(uint8_t *pBuf, uint8_t *length, uint8_t dpl)
{
uint8_t status, pipe;
// Extract a payload pipe number from the STATUS register
status = NRF24L01_Read_Reg(NRF24L01_REG_STATUS);
pipe = (status & NRF24L01_MASK_RX_P_NO) >> 1;
// RX FIFO empty?
if (pipe < 6)
{
if (dpl)
{
// Get payload width
*length = NRF24L01_RX_GetPayloadWidth();
if (*length > 32)
{
// Error
*length = 0;
NRF24L01_FlushRX();
}
}
else
{
*length = NRF24L01_Read_Reg(NRF24L01_REG_RX_PW_P0 + pipe);
}
// Read a payload from the RX FIFO
if (*length)
{
NRF24L01_Read_To_Buf(NRF24L01_CMD_R_RX_PAYLOAD, pBuf, *length);
}
return pipe;
}
// pipe value = 110: Not Used, 111: RX FIFO Empty
*length = 0;
return pipe;
}
/**
* Send data in tx_buf and wait till data is sent or max re-tr reached
*/
uint8_t NRF24L01_TxPacket(uint8_t *tx_buf, uint8_t len)
{
uint8_t status = 0x00;
CE_LOW;
len = len > NRF24L01_PLOAD_WIDTH? NRF24L01_PLOAD_WIDTH : len;
NRF24L01_Write_From_Buf(NRF24L01_CMD_W_TX_PAYLOAD, tx_buf, len);
CE_HIGH;
while(IRQ != 0); // Waiting send finish
CE_LOW;
status = NRF24L01_Read_Reg(NRF24L01_REG_STATUS);
BSP_UART_TxHex8(status);
BSP_UART_TxChar(':');
if(status & NRF24L01_FLAG_TX_DS)
{
BSP_UART_TxString("Data sent: ");
for (uint8_t i = 0; i < len; i++) {
BSP_UART_TxHex8(tx_buf[i]);
}
BSP_UART_TxString("\r\n");
NRF24L01_ClearIRQFlag(NRF24L01_FLAG_TX_DS);
}
else if(status & NRF24L01_FLAG_MAX_RT)
{
BSP_UART_TxString("Sending exceeds max retries\r\n");
NRF24L01_FlushTX();
NRF24L01_ClearIRQFlag(NRF24L01_FLAG_MAX_RT);
}
CE_HIGH;
return status;
}
void NRF24L01_TxPacketFast(const void *pBuf, uint8_t len)
{
NRF24L01_Write_From_Buf(NRF24L01_CMD_W_TX_PAYLOAD, pBuf, len);
CE_HIGH;
}
uint8_t NRF24L01_TxFast(const void *pBuf, uint8_t len)
{
uint8_t status;
// Blocking only if FIFO is full. This will loop and block until TX is successful or fail
do
{
status = NRF24L01_Read_Reg(NRF24L01_REG_STATUS);
if (status & NRF24L01_FLAG_MAX_RT)
{
return 1;
}
} while (status & NRF24L01_FLAG_TX_FULL);
NRF24L01_TxPacketFast(pBuf, len);
return 0;
}
void NRF24L01_ToggleFeatures(void)
{
CSN_LOW;
NRF24L01_Write_Reg(NRF24L01_CMD_ACTIVATE, 0x73);
CSN_HIGH;
}
void NRF24L01_SetEnableDynamicPayloads(uint8_t mode)
{
uint8_t reg = NRF24L01_Read_Reg(NRF24L01_REG_FEATURE);
if (mode == 0)
{
// Disable dynamic payload throughout the system
NRF24L01_Write_Reg(NRF24L01_REG_FEATURE, reg & (~NRF24L01_FEATURE_EN_DPL));
// If it didn't work, the features are not enabled
reg = NRF24L01_Read_Reg(NRF24L01_REG_FEATURE);
if ((reg & NRF24L01_FEATURE_EN_DPL) != 0)
{
// Enable them and try again
NRF24L01_ToggleFeatures();
NRF24L01_Write_Reg(NRF24L01_REG_FEATURE, reg & (~NRF24L01_FEATURE_EN_DPL));
}
// Disable dynamic payload on all pipes
NRF24L01_Write_Reg(NRF24L01_REG_DYNPD, 0);
}
else
{
NRF24L01_Write_Reg(NRF24L01_REG_FEATURE, reg | NRF24L01_FEATURE_EN_DPL);
reg = NRF24L01_Read_Reg(NRF24L01_REG_FEATURE);
if ((reg & NRF24L01_FEATURE_EN_DPL) != NRF24L01_FEATURE_EN_DPL)
{
NRF24L01_ToggleFeatures();
NRF24L01_Write_Reg(NRF24L01_REG_FEATURE, reg | NRF24L01_FEATURE_EN_DPL);
}
// Enable dynamic payload on all pipes
NRF24L01_Write_Reg(NRF24L01_REG_DYNPD, NRF24L01_DYNPD_DPL_P0 | NRF24L01_DYNPD_DPL_P1
| NRF24L01_DYNPD_DPL_P2 | NRF24L01_DYNPD_DPL_P3 | NRF24L01_DYNPD_DPL_P4 | NRF24L01_DYNPD_DPL_P5);
}
}
void NRF24L01_SetEnableAckPayload(uint8_t mode)
{
uint8_t reg = NRF24L01_Read_Reg(NRF24L01_REG_FEATURE);
if (mode == 0)
{
// Disable ack payload and dynamic payload features
NRF24L01_Write_Reg(NRF24L01_REG_FEATURE, reg &(~NRF24L01_FEATURE_EN_ACK_PAY));
// If it didn't work, the features are not enabled
reg = NRF24L01_Read_Reg(NRF24L01_REG_FEATURE);
if ((reg & NRF24L01_FEATURE_EN_ACK_PAY) != NRF24L01_FEATURE_EN_ACK_PAY)
{
// Enable them and try again
NRF24L01_ToggleFeatures();
NRF24L01_Write_Reg(NRF24L01_REG_FEATURE, reg &(~NRF24L01_FEATURE_EN_ACK_PAY));
}
}
else
{
NRF24L01_Write_Reg(NRF24L01_REG_FEATURE, reg | NRF24L01_FEATURE_EN_ACK_PAY);
reg = NRF24L01_Read_Reg(NRF24L01_REG_FEATURE);
if ((reg & NRF24L01_FEATURE_EN_ACK_PAY) != NRF24L01_FEATURE_EN_ACK_PAY)
{
NRF24L01_ToggleFeatures();
NRF24L01_Write_Reg(NRF24L01_REG_FEATURE, reg | NRF24L01_FEATURE_EN_ACK_PAY);
}
// Enable dynamic payload on pipes 0 & 1
reg = NRF24L01_Read_Reg(NRF24L01_REG_DYNPD);
NRF24L01_Write_Reg(NRF24L01_REG_DYNPD, reg | NRF24L01_DYNPD_DPL_P0 | NRF24L01_DYNPD_DPL_P1);
}
}
/**
* Dump nRF24L01 configuration
*/
void NRF24L01_DumpConfig(void) {
uint8_t i,j;
uint8_t aw;
uint8_t buf[5];
// CONFIG
i = NRF24L01_Read_Reg(NRF24L01_REG_CONFIG);
printf("[0x%02X] 0x%02X MASK:%02X CRC:%02X PWR:%s MODE:P%s\r\n",
NRF24L01_REG_CONFIG,
i,
i >> 4,
(i & 0x0c) >> 2,
(i & 0x02) ? "ON" : "OFF",
(i & 0x01) ? "RX" : "TX"
);
// EN_AA
i = NRF24L01_Read_Reg(NRF24L01_REG_EN_AA);
printf("[0x%02X] 0x%02X ENAA: ",NRF24L01_REG_EN_AA,i);
for (j = 0; j < 6; j++) {
printf("[P%1u%s]%s",j,
(i & (1 << j)) ? "+" : "-",
(j == 5) ? "\r\n" : " "
);
}
// EN_RXADDR
i = NRF24L01_Read_Reg(NRF24L01_REG_EN_RXADDR);
printf("[0x%02X] 0x%02X EN_RXADDR: ",NRF24L01_REG_EN_RXADDR,i);
for (j = 0; j < 6; j++) {
printf("[P%1u%s]%s",j,
(i & (1 << j)) ? "+" : "-",
(j == 5) ? "\r\n" : " "
);
}
// SETUP_AW
i = NRF24L01_Read_Reg(NRF24L01_REG_SETUP_AW);
aw = (i & 0x03) + 2;
printf("[0x%02X] 0x%02X EN_RXADDR=%03X (address width = %u)\r\n",NRF24L01_REG_SETUP_AW,i,i & 0x03,aw);
// SETUP_RETR
i = NRF24L01_Read_Reg(NRF24L01_REG_SETUP_RETR);
printf("[0x%02X] 0x%02X ARD=%04X ARC=%04X (retr.delay=%uus, count=%u)\r\n",
NRF24L01_REG_SETUP_RETR,
i,
i >> 4,
i & 0x0F,
((i >> 4) * 250) + 250,
i & 0x0F
);
// RF_CH
i = NRF24L01_Read_Reg(NRF24L01_REG_RF_CH);
printf("[0x%02X] 0x%02X (%.3uGHz)\r\n",NRF24L01_REG_RF_CH,i,2400 + i);
// RF_SETUP
i = NRF24L01_Read_Reg(NRF24L01_REG_RF_SETUP);
printf("[0x%02X] 0x%02X CONT_WAVE:%s PLL_LOCK:%s DataRate=",
NRF24L01_REG_RF_SETUP,
i,
(i & 0x80) ? "ON" : "OFF",
(i & 0x80) ? "ON" : "OFF"
);
switch ((i & 0x28) >> 3) {
case 0x00:
printf("1M");
break;
case 0x01:
printf("2M");
break;
case 0x04:
printf("250k");
break;
default:
printf("???");
break;
}
printf("pbs RF_PWR=");
switch ((i & 0x06) >> 1) {
case 0x00:
printf("-18");
break;
case 0x01:
printf("-12");
break;
case 0x02:
printf("-6");
break;
case 0x03:
printf("0");
break;
default:
printf("???");
break;
}
printf("dBm\r\n");
// STATUS
i = NRF24L01_Read_Reg(NRF24L01_REG_STATUS);
printf("[0x%02X] 0x%02X IRQ:%03X RX_PIPE:%u TX_FULL:%s\r\n",
NRF24L01_REG_STATUS,
i,
(i & 0x70) >> 4,
(i & 0x0E) >> 1,
(i & 0x01) ? "YES" : "NO"
);
// OBSERVE_TX
i = NRF24L01_Read_Reg(NRF24L01_REG_OBSERVE_TX);
printf("[0x%02X] 0x%02X PLOS_CNT=%u ARC_CNT=%u\r\n",NRF24L01_REG_OBSERVE_TX,i,i >> 4,i & 0x0F);
// RPD
i = NRF24L01_Read_Reg(NRF24L01_REG_RPD);
printf("[0x%02X] 0x%02X RPD=%s\r\n",NRF24L01_REG_RPD,i,(i & 0x01) ? "YES" : "NO");
// RX_ADDR_P0
NRF24L01_Read_To_Buf(NRF24L01_REG_RX_ADDR_P0,buf,aw);
printf("[0x%02X] RX_ADDR_P0 \"",NRF24L01_REG_RX_ADDR_P0);
for (i = 0; i < aw; i++) printf("%X ",buf[i]);
printf("\"\r\n");
// RX_ADDR_P1
NRF24L01_Read_To_Buf(NRF24L01_REG_RX_ADDR_P1,buf,aw);
printf("[0x%02X] RX_ADDR_P1 \"",NRF24L01_REG_RX_ADDR_P1);
for (i = 0; i < aw; i++) printf("%X ",buf[i]);
printf("\"\r\n");
// RX_ADDR_P2
printf("[0x%02X] RX_ADDR_P2 \"",NRF24L01_REG_RX_ADDR_P2);
for (i = 0; i < aw - 1; i++) printf("%X ",buf[i]);
i = NRF24L01_Read_Reg(NRF24L01_REG_RX_ADDR_P2);
printf("%X\"\r\n",i);
// RX_ADDR_P3
printf("[0x%02X] RX_ADDR_P3 \"",NRF24L01_REG_RX_ADDR_P3);
for (i = 0; i < aw - 1; i++) printf("%X ",buf[i]);
i = NRF24L01_Read_Reg(NRF24L01_REG_RX_ADDR_P3);
printf("%X\"\r\n",i);
// RX_ADDR_P4
printf("[0x%02X] RX_ADDR_P4 \"",NRF24L01_REG_RX_ADDR_P4);
for (i = 0; i < aw - 1; i++) printf("%X ",buf[i]);
i = NRF24L01_Read_Reg(NRF24L01_REG_RX_ADDR_P4);
printf("%X\"\r\n",i);
// RX_ADDR_P5
printf("[0x%02X] RX_ADDR_P5 \"",NRF24L01_REG_RX_ADDR_P5);
for (i = 0; i < aw - 1; i++) printf("%X ",buf[i]);
i = NRF24L01_Read_Reg(NRF24L01_REG_RX_ADDR_P5);
printf("%X\"\r\n",i);
// TX_ADDR
NRF24L01_Read_To_Buf(NRF24L01_REG_TX_ADDR,buf,aw);
printf("[0x%02X] TX_ADDR \"",NRF24L01_REG_TX_ADDR);
for (i = 0; i < aw; i++) printf("%X ",buf[i]);
printf("\"\r\n");
// RX_PW_P0
i = NRF24L01_Read_Reg(NRF24L01_REG_RX_PW_P0);
printf("[0x%02X] RX_PW_P0=%u\r\n",NRF24L01_REG_RX_PW_P0,i);
// RX_PW_P1
i = NRF24L01_Read_Reg(NRF24L01_REG_RX_PW_P1);
printf("[0x%02X] RX_PW_P1=%u\r\n",NRF24L01_REG_RX_PW_P1,i);
// RX_PW_P2
i = NRF24L01_Read_Reg(NRF24L01_REG_RX_PW_P2);
printf("[0x%02X] RX_PW_P2=%u\r\n",NRF24L01_REG_RX_PW_P2,i);
// RX_PW_P3
i = NRF24L01_Read_Reg(NRF24L01_REG_RX_PW_P3);
printf("[0x%02X] RX_PW_P3=%u\r\n",NRF24L01_REG_RX_PW_P3,i);
// RX_PW_P4
i = NRF24L01_Read_Reg(NRF24L01_REG_RX_PW_P4);
printf("[0x%02X] RX_PW_P4=%u\r\n",NRF24L01_REG_RX_PW_P4,i);
// RX_PW_P5
i = NRF24L01_Read_Reg(NRF24L01_REG_RX_PW_P5);
printf("[0x%02X] RX_PW_P5=%u\r\n",NRF24L01_REG_RX_PW_P5,i);
// NRF24L01_REG_FIFO_STATUS
i = NRF24L01_Read_Reg(NRF24L01_REG_FIFO_STATUS);
printf("[0x%02X] FIFO_STATUS=0x%02x\r\n",NRF24L01_REG_FIFO_STATUS,i);
// NRF24L01_REG_DYNPD
i = NRF24L01_Read_Reg(NRF24L01_REG_DYNPD);
printf("[0x%02X] DYNPD=0x%02x\r\n",NRF24L01_REG_DYNPD,i);
// NRF24L01_REG_FEATURE
i = NRF24L01_Read_Reg(NRF24L01_REG_FEATURE);
printf("[0x%02X] FEATURE=0x%02x\r\n",NRF24L01_REG_FEATURE,i);
}
Reference in New Issue View Git Blame Copy Permalink