mirror of
https://github.com/IcedRooibos/py32f0-template.git
synced 2025-10-30 09:22:06 -07:00
756 lines
32 KiB
C
756 lines
32 KiB
C
/**
|
|
******************************************************************************
|
|
* @file py32f0xx_hal_comp.h
|
|
* @author MCU Application Team
|
|
* @brief Header file of COMP HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) Puya Semiconductor Co.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __PY32F0xx_HAL_COMP_H
|
|
#define __PY32F0xx_HAL_COMP_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "py32f0xx_hal_def.h"
|
|
#include "py32f0xx_ll_exti.h"
|
|
|
|
/** @addtogroup PY32F0xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
|
|
/** @addtogroup COMP
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup COMP_Exported_Types COMP Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief COMP Init structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
|
|
uint32_t WindowMode; /*!< Set window mode of a pair of comparators instances
|
|
(2 consecutive instances odd and even COMP<x> and COMP<x+1>).
|
|
Note: HAL COMP driver allows to set window mode from any COMP instance of the pair of COMP instances composing window mode.
|
|
This parameter can be a value of @ref COMP_WindowMode */
|
|
|
|
uint32_t Mode; /*!< Set comparator operating mode to adjust power and speed.
|
|
Note: For the characteristics of comparator power modes
|
|
(propagation delay and power consumption), refer to device datasheet.
|
|
This parameter can be a value of @ref COMP_PowerMode */
|
|
|
|
uint32_t InputPlus; /*!< Set comparator input plus (non-inverting input).
|
|
This parameter can be a value of @ref COMP_InputPlus */
|
|
|
|
uint32_t InputMinus; /*!< Set comparator input minus (inverting input).
|
|
This parameter can be a value of @ref COMP_InputMinus */
|
|
|
|
uint32_t Hysteresis; /*!< Set comparator hysteresis mode of the input minus.
|
|
This parameter can be a value of @ref COMP_Hysteresis */
|
|
|
|
uint32_t OutputPol; /*!< Set comparator output polarity.
|
|
This parameter can be a value of @ref COMP_OutputPolarity */
|
|
|
|
uint32_t DigitalFilter; /*!< Specifies the digital filter. the filter is prohibited
|
|
when the value is zero.
|
|
This parameter must be a number between 0 and 0xFFFF */
|
|
|
|
uint32_t TriggerMode; /*!< Set the comparator output triggering External Interrupt Line (EXTI).
|
|
This parameter can be a value of @ref COMP_EXTI_TriggerMode */
|
|
|
|
} COMP_InitTypeDef;
|
|
|
|
/**
|
|
* @brief HAL COMP state machine: HAL COMP states definition
|
|
*/
|
|
#define COMP_STATE_BITFIELD_LOCK (0x10U)
|
|
typedef enum
|
|
{
|
|
HAL_COMP_STATE_RESET = 0x00U, /*!< COMP not yet initialized */
|
|
HAL_COMP_STATE_RESET_LOCKED = (HAL_COMP_STATE_RESET | COMP_STATE_BITFIELD_LOCK), /*!< COMP not yet initialized and configuration is locked */
|
|
HAL_COMP_STATE_READY = 0x01U, /*!< COMP initialized and ready for use */
|
|
HAL_COMP_STATE_READY_LOCKED = (HAL_COMP_STATE_READY | COMP_STATE_BITFIELD_LOCK), /*!< COMP initialized but configuration is locked */
|
|
HAL_COMP_STATE_BUSY = 0x02U, /*!< COMP is running */
|
|
HAL_COMP_STATE_BUSY_LOCKED = (HAL_COMP_STATE_BUSY | COMP_STATE_BITFIELD_LOCK) /*!< COMP is running and configuration is locked */
|
|
} HAL_COMP_StateTypeDef;
|
|
|
|
/**
|
|
* @brief COMP Handle Structure definition
|
|
*/
|
|
#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
|
|
typedef struct __COMP_HandleTypeDef
|
|
#else
|
|
typedef struct
|
|
#endif
|
|
{
|
|
COMP_TypeDef *Instance; /*!< Register base address */
|
|
COMP_InitTypeDef Init; /*!< COMP required parameters */
|
|
HAL_LockTypeDef Lock; /*!< Locking object */
|
|
__IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */
|
|
__IO uint32_t ErrorCode; /*!< COMP error code */
|
|
#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
|
|
void (* TriggerCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP trigger callback */
|
|
void (* MspInitCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP Msp Init callback */
|
|
void (* MspDeInitCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP Msp DeInit callback */
|
|
#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
|
|
} COMP_HandleTypeDef;
|
|
|
|
#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
|
|
/**
|
|
* @brief HAL COMP Callback ID enumeration definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_COMP_TRIGGER_CB_ID = 0x00U, /*!< COMP trigger callback ID */
|
|
HAL_COMP_MSPINIT_CB_ID = 0x01U, /*!< COMP Msp Init callback ID */
|
|
HAL_COMP_MSPDEINIT_CB_ID = 0x02U /*!< COMP Msp DeInit callback ID */
|
|
} HAL_COMP_CallbackIDTypeDef;
|
|
|
|
/**
|
|
* @brief HAL COMP Callback pointer definition
|
|
*/
|
|
typedef void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer to a COMP callback function */
|
|
|
|
#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup COMP_Exported_Constants COMP Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup COMP_Error_Code COMP Error Code
|
|
* @{
|
|
*/
|
|
#define HAL_COMP_ERROR_NONE (0x00UL) /*!< No error */
|
|
#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
|
|
#define HAL_COMP_ERROR_INVALID_CALLBACK (0x01UL) /*!< Invalid Callback error */
|
|
#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup COMP_WindowMode COMP Window Mode
|
|
* @{
|
|
*/
|
|
#define COMP_WINDOWMODE_DISABLE (0x00000000UL) /*!< Window mode disable: Comparators instances pair COMP1 and COMP2 are independent */
|
|
#define COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (COMP_CSR_WINMODE) /*!< Window mode enable: Comparators instances pair COMP1 and COMP2 have their input plus connected together. The common input is COMP1 input plus (COMP2 input plus is no more accessible). */
|
|
#define COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON (COMP_CSR_WINMODE | COMP_WINDOWMODE_COMP2) /*!< Window mode enable: Comparators instances pair COMP1 and COMP2 have their input plus connected together. The common input is COMP2 input plus (COMP1 input plus is no more accessible). */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup COMP_PowerMode COMP power mode
|
|
* @{
|
|
*/
|
|
/* Note: For the characteristics of comparator power modes */
|
|
/* (propagation delay and power consumption), */
|
|
/* refer to device datasheet. */
|
|
#define COMP_POWERMODE_HIGHSPEED (0x00000000UL) /*!< High Speed */
|
|
#define COMP_POWERMODE_MEDIUMSPEED (COMP_CSR_PWRMODE_0) /*!< Medium Speed */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup COMP_InputPlus COMP input plus (non-inverting input)
|
|
* @{
|
|
*/
|
|
#define COMP_INPUT_PLUS_IO1 (0x00000000UL) /*!< Comparator input plus connected to IO1 (pin PB8 for COMP1, pin PB4 for COMP2) */
|
|
#define COMP_INPUT_PLUS_IO2 (COMP_CSR_INPSEL_0) /*!< Comparator input plus connected to IO2 (pin PB2 for COMP1, pin PB6 for COMP2) */
|
|
#define COMP_INPUT_PLUS_IO3 (COMP_CSR_INPSEL_1) /*!< Comparator input plus connected to IO3 (pin PA1 for COMP1, pin PA3 for COMP2) */
|
|
#define COMP_INPUT_PLUS_IO4 (COMP_CSR_INPSEL_1 | COMP_CSR_INPSEL_0) /*!< Comparator input plus connected to IO4 (Reserved for COMP1, pin PF3 for COMP2) */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup COMP_InputMinus COMP input minus (inverting input)
|
|
* @{
|
|
*/
|
|
#define COMP_INPUT_MINUS_1_4VREFINT (0x00000000UL) /*!< Comparator input minus connected to 1/4 VrefInt */
|
|
#define COMP_INPUT_MINUS_1_2VREFINT ( COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to 1/2 VrefInt */
|
|
#define COMP_INPUT_MINUS_3_4VREFINT ( COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to 3/4 VrefInt */
|
|
#define COMP_INPUT_MINUS_VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to VrefInt */
|
|
#define COMP_INPUT_MINUS_VCC ( COMP_CSR_INMSEL_2 ) /*!< Comparator input minus connected to VCC */
|
|
#define COMP_INPUT_MINUS_TS ( COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to temperature sensor */
|
|
#define COMP_INPUT_MINUS_IO1 ( COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to IO1 (pin PB1 for COMP1, pin PB3 for COMP2) */
|
|
#define COMP_INPUT_MINUS_IO2 ( COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO2 (Reserved for COMP1, pin PB7 for COMP2) */
|
|
#define COMP_INPUT_MINUS_IO3 (COMP_CSR_INMSEL_3 ) /*!< Comparator input minus connected to IO3 (pin PA0 for COMP1, pin PA2 for COMP2) */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup COMP_Hysteresis COMP hysteresis
|
|
* @{
|
|
*/
|
|
#define COMP_HYSTERESIS_DISABLE (0x00000000UL) /*!< No hysteresis */
|
|
#define COMP_HYSTERESIS_ENABLE (COMP_CSR_HYST) /*!< Hysteresis enable */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup COMP_OutputPolarity COMP output Polarity
|
|
* @{
|
|
*/
|
|
#define COMP_OUTPUTPOL_NONINVERTED (0x00000000UL) /*!< COMP output level is not inverted (comparator output is high when the input plus is at a higher voltage than the input minus) */
|
|
#define COMP_OUTPUTPOL_INVERTED (COMP_CSR_POLARITY) /*!< COMP output level is inverted (comparator output is low when the input plus is at a higher voltage than the input minus) */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup COMP_OutputLevel COMP Output Level
|
|
* @{
|
|
*/
|
|
/* Note: Comparator output level values are fixed to "0" and "1", */
|
|
/* corresponding COMP register bit is managed by HAL function to match */
|
|
/* with these values (independently of bit position in register). */
|
|
|
|
/* When output polarity is not inverted, comparator output is low when
|
|
the input plus is at a lower voltage than the input minus */
|
|
#define COMP_OUTPUT_LEVEL_LOW (0x00000000UL)
|
|
/* When output polarity is not inverted, comparator output is high when
|
|
the input plus is at a higher voltage than the input minus */
|
|
#define COMP_OUTPUT_LEVEL_HIGH (0x00000001UL)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup COMP_EXTI_TriggerMode COMP output to EXTI
|
|
* @{
|
|
*/
|
|
#define COMP_TRIGGERMODE_NONE (0x00000000UL) /*!< Comparator output triggering no External Interrupt Line */
|
|
#define COMP_TRIGGERMODE_IT_RISING (COMP_EXTI_IT | COMP_EXTI_RISING) /*!< Comparator output triggering External Interrupt Line event with interruption, on rising edge */
|
|
#define COMP_TRIGGERMODE_IT_FALLING (COMP_EXTI_IT | COMP_EXTI_FALLING) /*!< Comparator output triggering External Interrupt Line event with interruption, on falling edge */
|
|
#define COMP_TRIGGERMODE_IT_RISING_FALLING (COMP_EXTI_IT | COMP_EXTI_RISING | COMP_EXTI_FALLING) /*!< Comparator output triggering External Interrupt Line event with interruption, on both rising and falling edges */
|
|
#define COMP_TRIGGERMODE_EVENT_RISING (COMP_EXTI_EVENT | COMP_EXTI_RISING) /*!< Comparator output triggering External Interrupt Line event only (without interruption), on rising edge */
|
|
#define COMP_TRIGGERMODE_EVENT_FALLING (COMP_EXTI_EVENT | COMP_EXTI_FALLING) /*!< Comparator output triggering External Interrupt Line event only (without interruption), on falling edge */
|
|
#define COMP_TRIGGERMODE_EVENT_RISING_FALLING (COMP_EXTI_EVENT | COMP_EXTI_RISING | COMP_EXTI_FALLING) /*!< Comparator output triggering External Interrupt Line event only (without interruption), on both rising and falling edges */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup COMP_Exported_Macros COMP Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup COMP_Handle_Management COMP Handle Management
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Reset COMP handle state.
|
|
* @param __HANDLE__ COMP handle
|
|
* @retval None
|
|
*/
|
|
#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
|
|
#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
|
(__HANDLE__)->State = HAL_COMP_STATE_RESET; \
|
|
(__HANDLE__)->MspInitCallback = NULL; \
|
|
(__HANDLE__)->MspDeInitCallback = NULL; \
|
|
} while(0)
|
|
#else
|
|
#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
|
|
#endif
|
|
|
|
/**
|
|
* @brief Clear COMP error code (set it to no error code "HAL_COMP_ERROR_NONE").
|
|
* @param __HANDLE__ COMP handle
|
|
* @retval None
|
|
*/
|
|
#define COMP_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_COMP_ERROR_NONE)
|
|
|
|
/**
|
|
* @brief Enable the specified comparator.
|
|
* @param __HANDLE__ COMP handle
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_EN)
|
|
|
|
/**
|
|
* @brief Disable the specified comparator.
|
|
* @param __HANDLE__ COMP handle
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_EN)
|
|
|
|
/**
|
|
* @brief Lock the specified comparator configuration.
|
|
* @note Using this macro induce HAL COMP handle state machine being no
|
|
* more in line with COMP instance state.
|
|
* To keep HAL COMP handle state machine updated, it is recommended
|
|
* to use function "HAL_COMP_Lock')".
|
|
* @param __HANDLE__ COMP handle
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_LOCK(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_LOCK)
|
|
|
|
/**
|
|
* @brief Check whether the specified comparator is locked.
|
|
* @param __HANDLE__ COMP handle
|
|
* @retval Value 0 if COMP instance is not locked, value 1 if COMP instance is locked
|
|
*/
|
|
#define __HAL_COMP_IS_LOCKED(__HANDLE__) (READ_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_LOCK) == COMP_CSR_LOCK)
|
|
|
|
/**
|
|
* @brief Disable vrefint input.
|
|
* @param __HANDLE__ COMP handle
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_DISABLE_SCALER(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_SCALER_EN)
|
|
|
|
/**
|
|
* @brief Check whether the vrefint input is enabled.
|
|
* @param __HANDLE__ COMP handle
|
|
* @retval Value 0 if COMP instance is not locked, value 1 if COMP instance is locked
|
|
*/
|
|
#define __HAL_COMP_IS_ENABLED_SCALER(__HANDLE__) (READ_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_SCALER_EN) == COMP_CSR_SCALER_EN)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup COMP_Exti_Management COMP external interrupt line management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable the COMP1 EXTI line rising edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() LL_EXTI_EnableRisingTrig(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Disable the COMP1 EXTI line rising edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() LL_EXTI_DisableRisingTrig(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Enable the COMP1 EXTI line falling edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() LL_EXTI_EnableFallingTrig(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Disable the COMP1 EXTI line falling edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() LL_EXTI_DisableFallingTrig(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Enable the COMP1 EXTI line rising & falling edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
|
|
LL_EXTI_EnableRisingTrig(COMP_EXTI_LINE_COMP1); \
|
|
LL_EXTI_EnableFallingTrig(COMP_EXTI_LINE_COMP1); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Disable the COMP1 EXTI line rising & falling edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
|
|
LL_EXTI_DisableRisingTrig(COMP_EXTI_LINE_COMP1); \
|
|
LL_EXTI_DisableFallingTrig(COMP_EXTI_LINE_COMP1); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Enable the COMP1 EXTI line in interrupt mode.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_ENABLE_IT() LL_EXTI_EnableIT(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Disable the COMP1 EXTI line in interrupt mode.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_DISABLE_IT() LL_EXTI_DisableIT(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Generate a software interrupt on the COMP1 EXTI line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_GENERATE_SWIT() LL_EXTI_GenerateSWI(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Enable the COMP1 EXTI line in event mode.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_ENABLE_EVENT() LL_EXTI_EnableEvent(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Disable the COMP1 EXTI line in event mode.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_DISABLE_EVENT() LL_EXTI_DisableEvent(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Check whether the COMP1 EXTI line rising flag is set.
|
|
* @retval RESET or SET
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_GET_RISING_FLAG() LL_EXTI_IsActiveRisingFlag(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Clear the COMP1 EXTI rising flag.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_CLEAR_RISING_FLAG() LL_EXTI_ClearRisingFlag(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Check whether the COMP1 EXTI line falling flag is set.
|
|
* @retval RESET or SET
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_GET_FALLING_FLAG() LL_EXTI_IsActiveFallingFlag(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Clear the COMP1 EXTI falling flag.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP1_EXTI_CLEAR_FALLING_FLAG() LL_EXTI_ClearFallingFlag(COMP_EXTI_LINE_COMP1)
|
|
|
|
/**
|
|
* @brief Enable the COMP2 EXTI line rising edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() LL_EXTI_EnableRisingTrig(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @brief Disable the COMP2 EXTI line rising edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() LL_EXTI_DisableRisingTrig(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @brief Enable the COMP2 EXTI line falling edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() LL_EXTI_EnableFallingTrig(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @brief Disable the COMP2 EXTI line falling edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() LL_EXTI_DisableFallingTrig(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @brief Enable the COMP2 EXTI line rising & falling edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
|
|
LL_EXTI_EnableRisingTrig(COMP_EXTI_LINE_COMP2); \
|
|
LL_EXTI_EnableFallingTrig(COMP_EXTI_LINE_COMP2); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Disable the COMP2 EXTI line rising & falling edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
|
|
LL_EXTI_DisableRisingTrig(COMP_EXTI_LINE_COMP2); \
|
|
LL_EXTI_DisableFallingTrig(COMP_EXTI_LINE_COMP2); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Enable the COMP2 EXTI line in interrupt mode.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_ENABLE_IT() LL_EXTI_EnableIT(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @brief Disable the COMP2 EXTI line in interrupt mode.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_DISABLE_IT() LL_EXTI_DisableIT(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @brief Generate a software interrupt on the COMP2 EXTI line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_GENERATE_SWIT() LL_EXTI_GenerateSWI(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @brief Enable the COMP2 EXTI line in event mode.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_ENABLE_EVENT() LL_EXTI_EnableEvent(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @brief Disable the COMP2 EXTI line in event mode.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_DISABLE_EVENT() LL_EXTI_DisableEvent(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @brief Check whether the COMP2 EXTI line rising flag is set.
|
|
* @retval RESET or SET
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_GET_RISING_FLAG() LL_EXTI_IsActiveRisingFlag(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @brief Clear the COMP2 EXTI rising flag.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_CLEAR_RISING_FLAG() LL_EXTI_ClearRisingFlag(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @brief Check whether the COMP2 EXTI line falling flag is set.
|
|
* @retval RESET or SET
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_GET_FALLING_FLAG() LL_EXTI_IsActiveFallingFlag(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @brief Clear the COMP2 EXTI falling flag.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_COMP_COMP2_EXTI_CLEAR_FALLING_FLAG() LL_EXTI_ClearFallingFlag(COMP_EXTI_LINE_COMP2)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup COMP_Private_Constants COMP Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup COMP_WindowMode_Instance_Differentiator COMP window mode instance differentiator
|
|
* @{
|
|
*/
|
|
#define COMP_WINDOWMODE_COMP2 0x00001000U /*!< COMP window mode using common input of COMP instance: COMP2 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup COMP_ExtiLine COMP EXTI Lines
|
|
* @{
|
|
*/
|
|
#define COMP_EXTI_LINE_COMP1 (EXTI_IMR_IM17) /*!< EXTI line 17 connected to COMP1 output */
|
|
#define COMP_EXTI_LINE_COMP2 (EXTI_IMR_IM18) /*!< EXTI line 18 connected to COMP2 output */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup COMP_ExtiLine COMP EXTI Lines
|
|
* @{
|
|
*/
|
|
#define COMP_EXTI_IT (0x00000001UL) /*!< EXTI line event with interruption */
|
|
#define COMP_EXTI_EVENT (0x00000002UL) /*!< EXTI line event only (without interruption) */
|
|
#define COMP_EXTI_RISING (0x00000010UL) /*!< EXTI line event on rising edge */
|
|
#define COMP_EXTI_FALLING (0x00000020UL) /*!< EXTI line event on falling edge */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup COMP_Private_Macros COMP Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup COMP_GET_EXTI_LINE COMP private macros to get EXTI line associated with comparators
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief Get the specified EXTI line for a comparator instance.
|
|
* @param __INSTANCE__ specifies the COMP instance.
|
|
* @retval value of @ref COMP_ExtiLine
|
|
*/
|
|
#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 \
|
|
: COMP_EXTI_LINE_COMP2)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup COMP_IS_COMP_Definitions COMP private macros to check input parameters
|
|
* @{
|
|
*/
|
|
#define IS_COMP_WINDOWMODE(__WINDOWMODE__) (((__WINDOWMODE__) == COMP_WINDOWMODE_DISABLE) || \
|
|
((__WINDOWMODE__) == COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON)|| \
|
|
((__WINDOWMODE__) == COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON) )
|
|
|
|
#define IS_COMP_WINDOWOUTPUT(__WINDOWOUTPUT__) (((__WINDOWOUTPUT__) == COMP_WINDOWOUTPUT_EACH_COMP) || \
|
|
((__WINDOWOUTPUT__) == COMP_WINDOWOUTPUT_COMP1) || \
|
|
((__WINDOWOUTPUT__) == COMP_WINDOWOUTPUT_COMP2) || \
|
|
((__WINDOWOUTPUT__) == COMP_WINDOWOUTPUT_BOTH) )
|
|
|
|
#define IS_COMP_POWERMODE(__POWERMODE__) (((__POWERMODE__) == COMP_POWERMODE_HIGHSPEED) || \
|
|
((__POWERMODE__) == COMP_POWERMODE_MEDIUMSPEED) )
|
|
|
|
#define IS_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) (((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO1) || \
|
|
((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO2) || \
|
|
((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO3) || \
|
|
((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO4))
|
|
|
|
#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT) || \
|
|
((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT) || \
|
|
((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT) || \
|
|
((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT) || \
|
|
((__INPUT_MINUS__) == COMP_INPUT_MINUS_VCC) || \
|
|
((__INPUT_MINUS__) == COMP_INPUT_MINUS_TS) || \
|
|
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1) || \
|
|
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2) || \
|
|
((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO3))
|
|
|
|
#define IS_COMP_INPUT_MINUS_VREFINT(__INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT) || \
|
|
((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT) || \
|
|
((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT) || \
|
|
((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT))
|
|
|
|
#define IS_COMP_HYSTERESIS(__HYSTERESIS__) (((__HYSTERESIS__) == COMP_HYSTERESIS_DISABLE) || \
|
|
((__HYSTERESIS__) == COMP_HYSTERESIS_ENABLE))
|
|
|
|
#define IS_COMP_OUTPUTPOL(__POL__) (((__POL__) == COMP_OUTPUTPOL_NONINVERTED) || \
|
|
((__POL__) == COMP_OUTPUTPOL_INVERTED))
|
|
|
|
#define IS_COMP_BLANKINGSRCE(__OUTPUT_BLANKING_SOURCE__) \
|
|
( ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE) \
|
|
|| ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC4) \
|
|
|| ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5) \
|
|
|| ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3) \
|
|
|| ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM3_OC3) \
|
|
|| ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM15_OC2) \
|
|
)
|
|
|
|
/* Note: Output blanking source common to all COMP instances */
|
|
/* Macro kept for compatibility with other PY32 series */
|
|
#define IS_COMP_BLANKINGSRC_INSTANCE(__INSTANCE__, __OUTPUT_BLANKING_SOURCE__) \
|
|
(IS_COMP_BLANKINGSRCE(__OUTPUT_BLANKING_SOURCE__))
|
|
|
|
|
|
#define IS_COMP_TRIGGERMODE(__MODE__) (((__MODE__) == COMP_TRIGGERMODE_NONE) || \
|
|
((__MODE__) == COMP_TRIGGERMODE_IT_RISING) || \
|
|
((__MODE__) == COMP_TRIGGERMODE_IT_FALLING) || \
|
|
((__MODE__) == COMP_TRIGGERMODE_IT_RISING_FALLING) || \
|
|
((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING) || \
|
|
((__MODE__) == COMP_TRIGGERMODE_EVENT_FALLING) || \
|
|
((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING_FALLING))
|
|
|
|
#define IS_COMP_OUTPUT_LEVEL(__OUTPUT_LEVEL__) (((__OUTPUT_LEVEL__) == COMP_OUTPUT_LEVEL_LOW) || \
|
|
((__OUTPUT_LEVEL__) == COMP_OUTPUT_LEVEL_HIGH))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup COMP_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup COMP_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
|
|
/* Initialization and de-initialization functions **********************************/
|
|
HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp);
|
|
HAL_StatusTypeDef HAL_COMP_DeInit(COMP_HandleTypeDef *hcomp);
|
|
void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp);
|
|
void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp);
|
|
|
|
#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
|
|
/* Callbacks Register/UnRegister functions ***********************************/
|
|
HAL_StatusTypeDef HAL_COMP_RegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID,
|
|
pCOMP_CallbackTypeDef pCallback);
|
|
HAL_StatusTypeDef HAL_COMP_UnRegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID);
|
|
#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* IO operation functions *****************************************************/
|
|
/** @addtogroup COMP_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp);
|
|
HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp);
|
|
void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Peripheral Control functions ************************************************/
|
|
/** @addtogroup COMP_Exported_Functions_Group3
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
|
|
uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
|
|
/* Callback in interrupt mode */
|
|
void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Peripheral State functions **************************************************/
|
|
/** @addtogroup COMP_Exported_Functions_Group4
|
|
* @{
|
|
*/
|
|
HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
|
|
uint32_t HAL_COMP_GetError(COMP_HandleTypeDef *hcomp);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* PY32F0xx_HAL_COMP_H */
|
|
|
|
/************************ (C) COPYRIGHT Puya *****END OF FILE****/
|